Product Description

Numerical control press

XTM**7S数控弓形油压机

XTM**7S numerical control bow pressure machine

产品名称：

Product name:

弓形油压机、C型油压机、单柱油压机、电机、轴承、马达压装机、落地式油压机、汽车配件铆接设备、液压整形机；

Bow pressure machine, C type oil pressure machine, single column hydraulic press, motor, bearing, motor press, landing type oil pressure machine, auto parts riveting equipment, hydraulic plastic machine;

适用范围：

Applicable scope:

本系列油压机广泛适用于各种材料的冲孔、压印、整形、铆接、弯曲、剪切、拉伸，各种小型零部件的压装、装配，是一种多用途冲床，采用先进的子母缸液压回路，无论是噪音、速度、耗电功率；

The series hydraulic machine is widely used in a variety of materials, punching, stamping, plastic, riveting, bending, shear, tensile, a variety of small parts of the press fit, assembly, is a multi-purpose machine, using advanced composite cylinder hydraulic circuit, whether it is noise, speed, power consumption rate;

产品特点：

Product features:

1.该系列液压压床以***0MPA的液体压力为动力源，外接三相AC**0V *0HZ或三相AC**0 *0HZ交流电源；

1. The series hydraulic press to ***0MPA liquid pressure as the power source, external three-phase AC**0V *0Hz or AC**0 *0Hz three-phase AC power supply;

2.该系列液压设备以液体作为介质来传递能量，采用先进的子母缸液压回路，油温低，空行程速度均在**0MM/秒以上，工进速度*0MM/秒以下；

2. The series hydraulic equipment in liquid as the medium to transmit energy, using advanced composite cylinder hydraulic circuit, low oil temperature, air travel speeds are in **0MM/ seconds or more, industry and trade into the speed *0MM/ seconds;

3.采用整体焊接的坚固开式结构，可使机身保持足够的刚性，同时拥有最方便的操作空间；

3 the use of the overall welding of the rugged open structure, can make the body to maintain adequate rigidity, while the most convenient operation space;

4.压力、行程、保压时间、闭合高度客户均可自行调整，方便操作；

4 the pressure, stroke, the time of holding pressure, closing the height of the customer can be adjusted to facilitate the operation;

5.具有自动计数功能，可也加装测力显示器、智能温控器，可依客户要求定做；

5 with automatic counting function, but also with force measuring display, intelligent temperature controller, customized according to customer requirements;

6.该系列液压机械出力范围有*5tf***0tf各种规格供选择（1tf=***0kgf=9.8KN)

6 this series of hydraulic mechanical output range of *5tf***0tf of various specifications for selection (1tf=***0kgf=9.8KN)

XTM**7S数控压装机，伺服压装机，数控轴承压装机：

XTM**7S numerical control press, servo press, numerical control, bearing press:

本机采进用进口触摸屏作为数据输入，数据显示，原装美国进口测力传感器作为压力采集信号，系统能以每秒**0次的速度对压力信号，位移信号进行运算，作出各种报警，以及曲线的的描绘。可以预先设定位移与压力的上下限曲线与当前压装值进行比较,输入任意压装位置,即可得到该位置在上次压装时产生的过盈阻力.

This machine have access to imported touch screen as data, the data show that imported from the United States measuring force sensor as the pressure signal acquisition system can at a speed of **0 times per second on the pressure signal and displacement signal operation, making a variety of alarm, and curves are depicted. The upper and lower limit curves of displacement and pressure can be compared with the current pressure value, and the can be obtained from any pressure loaded position.

压装机产品特点:

Press fit machine product features:

1.以***0MPA的液体压力为动力源,外接三相AC**0V *0HZ或三相AC**0 *0HZ交流电源.

1 to ***0MPA liquid pressure as the power source, external three-phase *0HZ AC**0V or three-phase *0HZ AC**0 AC power supply.

2.以液体作为介质来传递能量，采用进口低噪音齿轮油泵.

2 as a medium to transfer energy to the liquid, the use of imported low noise gear pump.

3.采用测力传感器直接测量压装力,精度为正负5N.压力信号控制系统采用数字信号传输,精确保证了测力传感器的精度不受传输而下降.

3 using the force sensor to measure the pressure directly, the accuracy of the positive and negative 5N. pressure signal control system using digital signal transmission, which can ensure the accuracy of the sensor is not transmitted.

3.设备待机,滑快上下移动时噪音比同类产品要小很多

3 equipment standby, sliding fast and down when the noise than similar products to the same product

4.采用整体焊接的坚固开式结构,可使机身保持足够的的钢性,同时拥有最方便的操作空间,

4 the use of the overall welding of the rugged open structure, can make the body to maintain the steel, while the most convenient operation space,

5.分手动和半自动两种控制方式,手动可将压装上模停在任意行程范围内,配有紧急回升按钮,加装有红外线护手装置.

5. Break up and semi-automatic two control modes, manual can be pressing die stopped at arbitrary distance range, equipped with emergency recovery , the installation of infrared hand device.

6.该系列压床的压装行程通过旋转编码器将位移量传送至可编程器,由已编写好的程序自动控制.

6. The series press pressing stroke by rotary encoder displacement is sent to the programmer, the program has been prepared for a good automatic control.

7.压力、行程、保压时间、闭合高度客户均可在触摸屏上自行调整.1.力的精确显示，最小单位0.*1KN（采用测力传感器直接测量

7 the pressure, stroke, time of holding pressure, closing the height of the customer can adjust the.1. force on the touch screen to accurately show that the smallest unit of 0.*1KN (measured by the force sensor

8.位移的精确显示 最小单位0.*1。

8 displacement of the smallest unit 0.*1.

9.过盈检测（预设5点位置的力进行上下限对比）

9 interference detection (the default position of the 5 points for the upper and lower limits)

*0.以X轴为位移，Y轴为力进行力位移曲线描绘。

*0 to X axis displacement, Y axis force of force displacement curve.

*1.可将压装数据保存成EXCEL格式，

*1 can be saved into EXCEL format data format,

*2.可存储*0套设定参数，8套不同的设备动作。

*2 can store *0 sets of parameters, 8 sets of different equipment operation.

*3.液压系统计内置机架内,外观整洁,轻巧,稳重.

*3 the hydraulic system is built into the frame, the appearance is neat, lightweight, stable.

*4.该系列液压机械出力为***0tf (1tf=***0kgf=9.8KN),也可依客户要求定做.

*4 the series hydraulic mechanical output is ***0tf (1tf=***0kgf=9.8KN), also can be customized according to customer requirements.

深圳市鑫台铭机械设备有限公司是一家专业研发、制造、销售精密压装设备厂家，主导产品有：伺服压装机、数控压装机、伺服压力机、电子压力机、伺服电子压力机、数控液压压装机、伺服液压压装机等，精密压装设备第一品牌，国家级高新技术企业，ISO***1品质保证。

Shenzhen City Xin Ming Machinery Equipment Co., Ltd. is a professional R & D, manufacturing, sales of precision equipment manufacturers, leading products are: servo press, CNC press, servo press, electronic press, servo Electronic Press, CNC hydraulic press, servo hydraulic press, the first brand, national high-tech enterprises, ISO***1 quality assurance.