FOB Price
Get Latest Price600 ~ 900 / ( Negotiable )
|50 Tonne Minimum Order
Country:
China
Model No:
hot dipped galvanized steel
FOB Price:
600 ~ 900 / ( Negotiable ) Get Latest Price
Place of Origin:
china
Price for Minimum Order:
600
Minimum Order Quantity:
50 Tonne
Packaging Detail:
standard seaworthy packing
Delivery Time:
a month
Supplying Ability:
800000 Tonne per Year
Payment Type:
T/T, L/C, D/P
Product Group :
China
Contact Person shayla
SBI,east-lake hi-tech development zone, Wuhan, Hubei
About our company
1 manufacturer,exporter
2 many years experience
3 *2 processing line
4 High quality & competitive price
5 famouse trademark of china
6 ISO***1,ISO****0
About the products
1 raw material: hot dip galvalizing
2 specification:1.**4.0********0mm
3 capicity:**0,**0tpy
4competitive price&high qulity
5 two hot dip galvanizing lines,one is HR CGL with capacity of **0.**0tpy,the other one is CR CGL with capacity of **0,**0tpy,total capacity is **0,**0tpy
6 surface structure:skin pass mill rolled spangle,zero spangle,mini spangle,zero spangle and Zn-Fe alloy
7 surface treatment:chrome passivation and/or oiling,chrome free passivation and/or oiling,chrome free anti-fingerprint
Hot dip galvanizing products
Standard,grade and purpose
| Type | Steel grade | Grade | Product standard | Grade in JISG***2,JFSA***1,JISG***2,JFSA***1 | Purpose |
| Low carbon steel and super low carbon steel | Commercial Quality(CQ) | DX*1D+Z DX*1D+ZF | GB/T ********8 EN********6 EN*********6 | SGCC | used for common forming component |
| Draw Quality(DQ) | DX*2D+Z DX*2D+ZF | SGCD1 JAC**0C | used for draw forming component | ||
| Deep Draw Quality(DDQ) | DX*3D+Z DX*3D+ZF | SGCD2 JAC**0D | used for deep draw forming component | ||
| Extra-Deep Draw Quality(EDDQ) | DX*4D+Z DX*4D+ZF DX*4D+ZA DX*4D+AZ | SGCD3 JAC**0E | used for extra deep draw forming component | ||
| Carbon structual steel or low alloy steel | structural steel(CQHSS) | S**0GD+Z S**0GD+ZF S**0GD+Z S**0GD+ZF S**0GD+Z S**0GD+ZF S**0GD+Z S**0GD+ZF S**0GD+Z S**0GD+ZF S**0GD+Z | SGC**0 SGC**0 SGC**0 SGC**0 | used for structural | |
product properties
| Tensile test | Coating adhensiveness | |||||||
| Grade | RclMpa | RmMpa | A*0mm%min | r*0min | n*0min | Bending diameter(a=strip thickness)of different coating weight(g/m2) | ||
| ≤**0/**0 | **0/**0~**5/**5 | not less than**5/**5 | ||||||
| DX*1D+Z DX*1D+ZF | **0~**0 | *2 | d=0 | d=a | d=2a | |||
| DX*2D+Z DX*2D+ZF | **0~**0 | **0~**0 | *6 | |||||
| DX*3D+Z DX*3D+ZF | **0~**0 | **0~**0 | *0 | |||||
| DX*4D+Z | **0~**0 | **0~**0 | *6 | 1.6 | 0.*8 | |||
| DX*4D+ZF | *4 | 1.4 | 0.*8 | |||||
| Grade | Tensile test | Coating adhensiveness | ||
| Rcl Mpa | Rm Mpa | A*0mm% min | **00Bending diameter(a=strip thickness) | |
| S**0GD+Z S**0GD+ZF | **0 | **0 | *0 | d=a |
| S**0GD+Z S**0GD+ZF | **0 | **0 | *9 | d=a |
| S**0GD+Z S**0GD+ZF | **0 | **0 | *8 | d=a |
| S**0GD+Z S**0GD+ZF | **0 | **0 | *7 | d=2a |
| S**0GD+Z S**0GD+ZF | **0 | **0 | *6 | d=3a |
| S**0GD+Z | **0 | **0 | ||
product dimension,coil diameter,coil weight
| Grade | Nominal thickness(mm) | Nominalwidth | Coil O.D. | Coil I.D. | Weight |
| Common galvanizing(Z) | 0.***1.5 | *******0 | **0or**8 | *******0 | coil≤*5 |
| Galvanizing(ZF) | 0.***1.5 | *******0 | **0or**8 | *******0 | coil≤*5 |
| Zn-Al(ZA) | 0.***1.5 | *******0 | **0or**8 | *******0 | coil≤*5 |
| Al-Zn alloy(AZ) | 0.***1.5 | *******0 | **0or**8 | *******0 | coil≤*5 |
Noninal width
| Yield strength min.Mpa | Nominal thickness(mm) | Thickness tolerance | ||||
| Normal precisionPT.A | High precisionPT.B | |||||
| Normal width | ||||||
| ≤***0 | >****-≤***0 | >***0 | ≤***0 | >****-≤***0 | ||
| ≤0.*4 | ±0.*5 | ±0.*6 | — | ±0.*3 | ±0.*4 | |
| >0.***0.*0 | ±0.*6 | ±0.*7 | ±0.*8 | ±0.*4 | ±0.*5 | |
| >0.***0.*0 | ±0.*7 | ±0.*8 | ±0.*9 | ±0.*5 | ±0.*6 | |
| <**0 | >0.***1.*0 | ±0.*8 | ±0.*9 | ±0.*0 | ±0.*6 | ±0.*7 |
| >1.***1.*0 | ±0.*9 | ±0.*0 | ±0.*1 | ±0.*7 | ±0.*8 | |
| >1.***1.*0 | ±0.*1 | ±0.*2 | ±0.*2 | ±0.*8 | ±0.*9 | |
| >1.***2.*0 | ±0.*3 | ±0.*4 | ±0.*4 | ±0.*9 | ±0.*0 | |
| >2.***2.*0 | ±0.*5 | ±0.*6 | ±0.*6 | ±0.*1 | ±0.*2 | |
| >2.***3.*0 | ±0.*7 | ±0.*8 | ±0.*8 | ±0.*2 | ±0.*3 | |
| ≤0.*4 | ±0.*6 | ±0.*7 | — | ±0.*4 | ±0.*5 | |
| >0.***0.*0 | ±0.*7 | ±0.*8 | ±0.*9 | ±0.*5 | ±0.*6 | |
| >0.***0.*0 | ±0.*8 | ±0.*9 | ±0.*1 | ±0.*6 | ±0.*6 | |
| >0.***1.*0 | ±0.*9 | ±0.*1 | ±0.*2 | ±0.*7 | ±0.*8 | |
| ≥**0 | >1.***1.*0 | ±0.*1 | ±0.*2 | ±0.*3 | ±0.*8 | ±0.*9 |
| >1.***1.*0 | ±0.*3 | ±0.*4 | ±0.*4 | ±0.*9 | ±0.*1 | |
| >1.***2.*0 | ±0.*5 | ±0.*7 | ±0.*7 | ±0.*1 | ±0.*2 | |
| >2.***2.*0 | ±0.*9 | ±0.*9 | ±0.*3 | ±0.*4 | ||
| >2.***3.*0 | ±0.*1 | ±0.*1 | ±0.*4 | ±0.*5 | ||
Note:For cold-rolled wide strip in the weld zone within *5m of thickness tolerances than the specified than the specified value on the table is *0% larger
width tolerance
| Nominal width mm | Width tolerance | |||
| Normal precision PW.A | High precision PW.B | |||
| Min | Max | Min | Max | |
| ≥*******0 | 0 | plus5 | 0 | plus2 |
| not less than ********0 | 0 | plus 6 | 0 | plus2 |
Length tolerance
| Nominal length mm | Length tolerance(mm) | |||
| Normal precision PL.A | High precision PL.b | |||
| Min | Max | Min | Max | |
| <***0 | 0 | *6 | 0 | *3 |
| ≥***0 | 0 | Length of 0.3% | 0 | Length of 0.*5% |
Flatness
| flatness of galvanized strip with minimum yield strength<**0Mpa | ||||||
| Nominal width mm | flatness,not greater than | |||||
| Normal precision PF.A | High precision PF.B | |||||
| Nominal thickness | ||||||
| <0.7 | ≥0.**1.2 | ≥1.2 | <0.7 | ≥0.**1.2 | ≥1.2 | |
| ≥*******0 | *2 | *0 | 8 | 5 | 4 | 3 |
| ≥********0 | *5 | *2 | *0 | 6 | 5 | 4 |
| ≥***0 | *9 | *7 | *5 | 8 | 7 | 6 |
| flatness of galvanized strip with minimum yield strength≥******0Mpa | ||||||
| Nominal width mm | flatness,not greater than | |||||
| Normal precision PF.A | High precision PF.B | |||||
| Norminal thickness | ||||||
| <0.7 | ≥0.**1.2 | ≥1.2 | <0.7 | ≥0.**1.2 | ≥1.2 | |
| ≥*******0 | *5 | *3 | *0 | 8 | 6 | 5 |
| ≥********0 | *8 | *5 | *3 | 9 | 8 | 6 |
| ≥***0 | *2 | *0 | *9 | *2 | *0 | 9 |
Coating weight
| Yield strength min.Mpa | Nominal thickness(mm) | Thickness tolerance | ||||
| Normal precisionPT.A | High precisionPT.B | |||||
| Normal width | ||||||
| ≤***0 | >****-≤***0 | >***0 | ≤***0 | >****-≤***0 | ||
| ≤0.*4 | ±0.*5 | ±0.*6 | — | ±0.*3 | ±0.*4 | |
| >0.***0.*0 | ±0.*6 | ±0.*7 | ±0.*8 | ±0.*4 | ±0.*5 | |
| >0.***0.*0 | ±0.*7 | ±0.*8 | ±0.*9 | ±0.*5 | ±0.*6 | |
| <**0 | >0.***1.*0 | ±0.*8 | ±0.*9 | ±0.*0 | ±0.*6 | ±0.*7 |
| >1.***1.*0 | ±0.*9 | ±0.*0 | ±0.*1 | ±0.*7 | ±0.*8 | |
| >1.***1.*0 | ±0.*1 | ±0.*2 | ±0.*2 | ±0.*8 | ±0.*9 | |
| >1.***2.*0 | ±0.*3 | ±0.*4 | ±0.*4 | ±0.*9 | ±0.*0 | |
| >2.***2.*0 | ±0.*5 | ±0.*6 | ±0.*6 | ±0.*1 | ±0.*2 | |
| >2.***3.*0 | ±0.*7 | ±0.*8 | ±0.*8 | ±0.*2 | ±0.*3 | |
| ≤0.*4 | ±0.*6 | ±0.*7 | — | ±0.*4 | ±0.*5 | |
| >0.***0.*0 | ±0.*7 | ±0.*8 | ±0.*9 | ±0.*5 | ±0.*6 | |
| >0.***0.*0 | ±0.*8 | ±0.*9 | ±0.*1 | ±0.*6 | ±0.*6 | |
| >0.***1.*0 | ±0.*9 | ±0.*1 | ±0.*2 | ±0.*7 | ±0.*8 | |
| ≥**0 | >1.***1.*0 | ±0.*1 | ±0.*2 | ±0.*3 | ±0.*8 | ±0.*9 |
| >1.***1.*0 | ±0.*3 | ±0.*4 | ±0.*4 | ±0.*9 | ±0.*1 | |
| >1.***2.*0 | ±0.*5 | ±0.*7 | ±0.*7 | ±0.*1 | ±0.*2 | |
| >2.***2.*0 | ±0.*9 | ±0.*9 | ±0.*3 | ±0.*4 | ||
| >2.***3.*0 | ±0.*1 | ±0.*1 | ±0.*4 | ±0.*5 | ||
Note:1)grade of Zn-Fe alloy coating till ZF**0
2)double side coating weight **0g/m2 corresponds to coating thickness 7.1μm
3)coating weight can be tailored to customer's special requirement
.
| Country: | China |
| Model No: | hot dipped galvanized steel |
| FOB Price: | 600 ~ 900 / ( Negotiable ) Get Latest Price |
| Place of Origin: | china |
| Price for Minimum Order: | 600 |
| Minimum Order Quantity: | 50 Tonne |
| Packaging Detail: | standard seaworthy packing |
| Delivery Time: | a month |
| Supplying Ability: | 800000 Tonne per Year |
| Payment Type: | T/T, L/C, D/P |
| Product Group : | hot dipped galvanized steel |
