FOB Price
Get Latest Price|
1 Minimum Order
Country:
China
Model No:
Model PSYF-CG-1000
FOB Price:
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
1
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Product Group :
-
Contact Person Mr. robinson
19 Linyin Road, Nanjing, Jiangsu
| Continuous Production Line of Rigid Polyfoam Sandwich Panel with Color-Steel Facings |
|
The
line is a kind of specialized equipment used for producing
color-steel-sided sandwich panels with the middle layer of
anti-combustion polyurethane, polyisocyanurate or phenolic foam.
The thickness of the produced sandwich panel ranges from *0 to **0
mm, the width between **0 and ***0 mm and the length on request.
The production line is mainly applied to make wall and roof panels
of steel structure buildings, which can also make various other
insulation panels if replacing facing sheet. Its operation
principle is as follows: Rigid polyfoam raw materials, according to
a certain blending ratio, are delivered into mixing head to agitate
through metering pump unit on the injection machine and then
uniformly injected onto the bottom facing sheet of sandwich panel.
After the injection, the bottom facing sheet shall move toward the
double-belt conveyors together with panels top facing sheet.
Between the two conveyors, injected raw material is foamed and
hardened into shape. At the end of the line, the formed sandwich
panel is cut into preset length by an automatic tracking
cutter. |
| Main technical parameters |
| Main constituents |
| 1. Hydraulic decoiler 2. Upper and lower
forming machine 3. Pre-heating
table 4. Heating oven 5. Reaction
injection machine 6.Side chemical sealing
installation 7. Double-belt
laminator 8. Hot-air
circulator 9. Cross-cutter *0.
Hydraulic clipper & film coverer *1. Mobile
injector 1. Hydraulic decoiler: Used for decoiling and hydraulically expanding steel coils with max.weight of 5T or *0T (for optional use). 2. Upper and lower forming machines: With a plate-like structure welded by steel frames and gear transmission system,forming profile to be custom-made. 3. Pre-heating table: To heat to *0℃, temperature adjustable. 4. Pre-heating oven: An oven is designed to achieve up to *0℃, temperature adjustable. 5. Reaction Injection machine: To meter and mix two different liquid components in a given mixing ratio required by technical process. A chiller and a temperature controller are equipped to meet the temperature requirements of foaming liquid chemicals. We have both high and low pressure machines for user's optional use. 6. Side chemical sealing installation: To prevent foaming chemicals from leaking out at panel's sides. Its running speed can be matched up with that of laminator. Sealing width of panel is adjustable. 7. Double-belt laminator: Options of laminator's length: *2m, *8m, *4m, *0m or *6m; speed range: 3 to 8m/min. Materials of laminator's conveyor plank can be either steel or aluminum as per client's choice. 8. Hot-air circulator: Used to heat up laminator's belt conveyors in an optional design of air circulation route which can heat to *0℃ from *0℃ in one hour. There are both furnace and electricity heaters equipped on the line while the furnace can either use fuel oil or steam as heating energy depending on customer's choice. 9. Cross-cutter: With both bandsaw and disc saw machines for optional use. (Pls refer to the introduction on cutter series under matching equipment ). *0. Hydraulic clipper: For hydraulically cutting steel or aluminum sheet after the decoiling process. Its cutter with the max. Cutting thickness of 1mm and the hydraulic decoiler share one hydraulic station. *1. Mobile injector: The user can choose either a servo motor or servo motor with a crank as the driving system |
| Optional equipment |
| 1.Flipper: To flip finished panels over onto a powered roller
conveyor ready for the next packing process. 2.Cooling system: To be put at the end of sandwich panel production line for the purpose of cooling sandwich panels. It can flip and load 4 pcs of 2.4m panels at one time. Two such systems can load about **0 pcs of sandwich panels. Distance between the two shafts of the system is 6m and chain pitch is **0mm. 3. Lifting and parallel moving installation with vacuum suckers: To move panels from ready-stacking position onto a a powered roller conveyor for the next process, whole operation automatically controlled by PLC. 4. Packing machine of winding type: For packing sandwich panels. |
| Main technical parameters |
| Specification of the
panel **0~***0mm
(width) *0~**0mm (thickness) Length to be custom-made Production speed 3~8m/min Length of belt laminator *4m Max temperature of hot-air circulation *0℃ Dimensions of the line about ****0×7,**0×3,**0mm(L×W×H) Total power about **3kw Power of hot-air furnace *****0 kcal |
| Country: | China |
| Model No: | Model PSYF-CG-1000 |
| FOB Price: | Get Latest Price |
| Place of Origin: | - |
| Price for Minimum Order: | - |
| Minimum Order Quantity: | 1 |
| Packaging Detail: | - |
| Delivery Time: | - |
| Supplying Ability: | - |
| Payment Type: | - |
| Product Group : | - |
