Product Description

PVC Insulated PVC Sheathed Power Cables (Including ordinary and flame retardant) Standard: The cable is manufactured according to GB *******1 or IEC*********7. It is suitable to be laid in the four wires system with rated voltage of 0.6/1kV Uo/U for power transmission. The maximum operating temperature of cores shall not exceed *0 Centidegree when the cable is used for long period. The temperature of cores shall not exceed **0 Centidegree at short circuit for 5 xxxxx ambient temperature should not be below 0 degree during installation. The permissible bending radius for cable shall be the permissible bending radius for cable shall be complied with the regulation as below: For single-core: R>*5 (D+d) +/*5% For multi-core: R>*5 (D+d) +/*5% Where: R****-bending radius (mm) D****-overall diameter of the cable (mm) d****-diameter of conductor (mm) The single core cable of using in AC circuit shall be without armour or with steel wire armour and shell not be laid in magnetic ducts. PVC Insulated PVC Sheathed Control Cable (Including ordinary and flame retardant) Standard: The cable is manufactrued according to GB******8 or IEC **7 (***9). It is suitable for connection of electric apparatus and instrument in electricity distribution equipment with xxxxx rated voltage up to and including **0V/**0V or xxxxx***0V. The permissible operating temperature of conductor shall not exceed *0 Centidegree when the cable is used for long period. The cable shall be installed at temperaure not less than 0 Centidegree. The bending radius shall not be less than 6D (without copper tape and steel tape armouring) and *2D (with copper tape and steel tape armouring) respectively. D:overall diameter of cable.