Product Description

The raw materials for our products are PP plastic, fiberglass and calcium carbonate.In order to strength the plastic hardness, we add glassfiber in the raw materials, it will make the final products reuse longer time and make the surface to keep flat. 
 
The advantages of our plastic formwork：
1.Strong enough to resist the pressure or the weight of the fresh concrete plus any
constructional live loads.
2. Rigid enough to retain the shape without undue deformation.
3. Economical in terms of the total cost of the forms and the concrete surface finishing when required.
4. Sufficiently watertight to avoid leakage at the joints.They have impervious surfaces that usually create a smooth finish to the concrete. 

Plastic construction formwork  is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. Plastic formwork is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. Hollow plastic formwork is energy saving and environmental protection,and can completely replace the traditional steel formwork, wood formwork, square wood, What's more, its amortization cost is very low.

Inspection method of Yaohang Hollow plastic formwork:
 1. Flexibility test
Toughness test when the template is bent: Use a forklift to crush the template that is not in the same plane (one side is grounded, one side is placed obliquely), and the template is intact without damage after rebound.
2.Weight capacity detection
Use a small round head hammer to slam the smooth surface of the plastic building template and observe the surface depression. Good quality building templates will have depressions, but there will be no cracks.
3.Shrinkage test
The two templates are placed side by side on the wooden board to record the gap distance between the two boards. After two days and two nights, the difference is not more than 3mm*5mm compared with the previously measured data.
4.Nail-holding strength Nail at a distance of 5 mm from the edge of the plate. If there is no crack, this indicates that the quality of the plate is good; after the nail is nailed, observing whether the bonding state of the nail and the template is saturated and tight.

FAQ

1.Q: Are you a factory or trading company?

A: We are a factory of reusable construction formwork material.

2.Q: How can I get some samples?

A: We are honored to offer you free samples.

3.Q: How does your factory control quality?

A: Quality is priority. We always control from the very beginning to the end , from the raw materials to the production. Every batch of materials, we must test the quality about the impact stength , Vicart , bending strength. Our factory has gained ISO***1:***8.

4.Q: How many times does your formwork reused?

A:It can be reused over *0 times.

5.Q: Does this formwork stick concrete? and easily remove or not?

A:It doesn't stick concrete and easily remove, even no need any release agent, only tapping can fallen off.

6.Q: How to clean the used formwork?

A: Only using the high-pressure water gun can make it clean.

7. Q: what are your foreigh markets?

A: Middle East countries, Africa countries, the eastern European countries,Oceania countries