Product Description
Mr Jun Huang:
I'm so glad to introduce our products for you. According to your
description and the characteristic of our products, I show the main
structure, the features and components of the machine as
follows:
Ⅰ.
Main Parameters:
1.)
Power supply:**0V、*0HZ
2.)
Air pressure:***0L/MIN, **8BARs
3.)
Production: Cotton Core Without wings, I-type, Solid Protect ,
Elastic Waistband Adult Diaper
4.)
ProductSpecification: by the
client
5.)
Structure of the product:
Surface Layer +
Solid Protect +Cotton Core + Tissue Paper + SAP+ ADL + Elastic
Waistband + Elastic
Ribbon + Elastic
Ribbon +Side Tape + Bottom Film
6.)
Power:**0KW(exclude hot melt applicator andair compressor)
7.)Design
speed:**0pcs/min
8.)Stable
speed:**0pcs/min
9.)
Ratio of comformity:≥*7%(waste
caused by hot melt
applicator, raw material
and auto splicing
excluded).
*0.)
Machine direction: by the client
*1.）machine
color：by
the client
Ⅱ.
Main Configurations:
Machinery
Section:
Unwinding
Part: raw materials
areVFDsdecoiled,
constant tension control and auto connect material.
1.)
Pulp unwinding
pulp
rack can hold maximal diameter ***0 roll material.
2.)
up-Tissue paper auto unwinding
tension control
system 1 set( web guide, auto exchanging material 1 set, inflatable
shaft 2 sets, coil frequency conversion motor 2 sets)
3.)
down-Tissue paper auto unwinding
tension control
system 1 set( web guide, auto exchanging material 1 set, inflatable
shaft 2 sets,
coil
frequency conversion motor 2 sets)
4.)
hydrophobic N.W auto unwinding
tension control
system 1 set( web guide, auto exchanging material 1 set, inflatable
shaft 2 sets,
coil
frequency conversion motor 2 sets)
5.)
hydrophilic N.W auto unwinding
tension control
system 1 set( web guide, auto exchanging material 1 set, inflatable
shaft 2 sets,
coil
frequency conversion motor 2 sets)
6.)
surface (Overall or three chip) auto unwinding
tension control
system 1 set( web guide, auto exchanging material 1 set, inflatable
shaft 2 sets,
coil
frequency conversion motor 2 sets)
7.）elastic
waistband auto unwinding
unwinding
material rack 2 rolls, decoiled by pull roll. Adopt stepless ‘S’
wheel to tension pull
materials. web
guide.
8.）elastic
ribbon atuo unwinding with adjustable tightness
9.）wet
strength paperauto
unwinding
tension control
system 1 set( web guide, auto exchanging material 1 set, inflatable
shaft 2 sets,
coil
frequency conversion motor 2 sets)
*0.）side
tape auto unwinding
unwinding
material rack 2 rolls, mechanical manual exchanging material 1 set(
slow down to
change)
*1.）frontal
tape auto unwinding
unwinding material
rack 2 rolls, mechanical manual exchanging material 1 set( slow
down to change)
Pulverize and
Forming :
1.)adopt
the copper saw pulverizer to smash both the untreated and hanlded
pulp. Pulp Loading use
cylinder lifting
device. Feeding pulp adopt the Inverter controller, in order to
keeping the proportion
of
the pulp which setting on the touch screen, synchronous with the
host in high or low speed .The
direction of
wood pulp feeding is in line with machine direction.
Maxφ***0mmof
wood pulp.
2.)cotton
corn of absorber are demoulded, adsorpted, and transfered by
net-mould wheel, tissue is
tri-folding
packaged forming.(Dust collecting by clothbag
integrate.)
3.)SAP
is twin-screw rationed, applying in mixed way and pumping with
subatomospheric pressure
stratification.
When the SAP is in the lower reservoir, the alarm will
automatically feeding.
Transmission
drived by converter motor.
Knife
mold：
1.)Absorber
press 1 set (press the demolded cotton core through th upper and
lower stick)
2.)Absorber
embossing grid 1 set (according to products design, press out the
figure on the core
through the
upper and lower heating )
3. )
Absorber (cotton core)cutting1 set(according the designed length,
cut off at both ends by the upper
cutter and lower
stick,and transmit)
4. )
hydrophobic N.W cutting 1 set (according the designed length, cut
off at both ends by the upper
cutter and lower
stick,and transmit)
5. )
hydrophobic N.W unit 1 set (splitting)
6. )
surface N.W unit 1 set
7. )
wet strength paper unit 1 set
8. )
elastic waistband slice cutting 1 set (according the designed
length, cut off at both ends by the
upper blade and
lower suction drum)
9. )
side tape splitting 1 set (according the designed length, cut off
at both ends by the upper blade and
lower suction
drum)
*0.
) frontal tape appressed 1set (according the designed length, cut
off at both ends by the upper blade
and
lower suction drum)
*1.
) Three-stick press device1set
*2.
) ARC cutting unit 1set (according the designed shape, cut off at
both ends by the upper and lower
stick
*3.
) final cutting 1set (according the designed shape, cut off at both
ends by the upper and lower
stick
*4.
) Three-stick press device1set
*5.
) Side fold unit 1 set
*6. ) phase adjusted
without stopping, splitting system adopts shaving cut type and heat
twist pressed by cylinder, all
the heated auto lift
while shut down.
| Country: |
China |
| Model No: |
RF-CKB
|
| FOB Price: |
(Negotiable)
Get Latest Price
|
| Place of Origin: |
- |
| Price for Minimum Order: |
- |
| Minimum Order Quantity: |
1 set |
| Packaging Detail: |
- |
| Delivery Time: |
- |
| Supplying Ability: |
100 |
| Payment Type: |
- |
| Product Group : |
- |
