Product Description

FEATURES: Ritver Acrylic 2K Topcoat is a good quality Acrylic polyol High Build based top-finish and forms a two component product with a suitable curing agent. The product is based on a good endowed with very good opacity, hardness and yellowing resistance. It is especially recommended for systems to meet the harsh climatic conditions of the Gulf and other regions. Its proven performance helps it to be the best choice for a good quality Acrylic finish with long life. INTENDED USE: ⿢ Substrates: Concrete, steel, GRP, other metals, Texotile systems and wood coatings. . ⿢ Area of Use: Interiors and Exteriors. TECHNICAL DATA ⿢ Finish :: Glossy and smooth. (Gloss levels of *0 ⿿ *0 ⿿ *0, some cases as desired) ⿢ Colour :: Clear and transparent. ⿢ Specific gravity :: 1.*6 +/- .**5 ⿢ Mixed Solids (% by volume) :: *2 +/- 2 ⿢Catalyst :: 9:1 v/v (Component A: Component B vol / vol) ⿢ Pot life (at *0°c) :: min 4 hours after mixing ⿢ Diluent :: Ritver PU thinner. ⿢Film characteristics :: Gloss, hardness, non yellowing properties are satisfactory. ⿢ Flash point :: <*1 °c ⿢ Spread Rate: While the spread rate is directly dependant on the surface profile and also the type of undulations it has, as a thumb rule Ritver Acrylic 2K Topcoat would cover *2 ⿿ *4 meters per lit. ⿢ Drying Time (*0° C : Dust Free: *5 min : Touch Dry <*0 min : Hard Dry > *4 Hours. : ⿢ Recommended DFT : 1 mist coat followed by a good full coat. App *0 - *0 mic. SURFACE PREPARATION: For Metals: Achieve a good and clean surface by removing all contaminants by cleaning & drying. A rust free surface should be achieved by good sweep blast or a wire brush. In case of automobile substrates where a high degree of surface is to be maintained the use of Ritver degreasing Solvent is recommended. The proceed with the recommended system