Road Marking Machine
Hand Push Marking Machine is one of the key machines for thermo-melting coating marking. The marking quality depends on the stability of machine frame and the operating range of marking hopper, which reflect the difference in performance of machine.

 

TOP WAY TW-H Hand Push Marking Machine in its new design, its wheel space wider, center of gravity changed，shaft form renewed, so the machine body is lighter and more flexible, reduced labor intensity，such problems as uneven finishing mark edge and over operation are solved, and reduced unstableness when marking zebra crossing.

 

Technical parameters

1.   Outer dimensions：***0 mm×**0 mm×**0mm

2.   Total weight of machine：**5kg

3.   Capacity of glass bead box：*5kg

4.   Capacity of stirring tank ：**5kg

5.   Coat thickness：1.2～4mm

6.   Bead dispensing method: Gear Driven, Automatically Clutch

7.   Temperature maintenance of coating material：**0～**0℃

8.   LPG cylinder norm：*5kg

9.   Marking width : *0,*0,**0,**0,**0,**0,**0,**0,**0mm,the machine is more suitable for marking **0mm zebra stripes.

 

1.  More stable：

Through gravity adjustment, widened front wheel, the Marking Machine is more stable than traditional ones when marking **0mm zebra crossing.

2.  Lighter：

Through repeatedly gravity test, rechoose new shaft, the marking machine is much lighter, reduced operator’s working intensity. So the marking works become easier and more effectively.

3.  Easy to operate：

Marking hopper’s operating range minimized from **0mm to **0mm， more accurately , easier to control, therefore such problems as slow hopper withdrawal and uneven finishing mark edge are solved. A multi-point sliding block pressing structure is used to avoid material leakage witch often occurs to similar products due to the two tightly pressed sides and large deformation in the middle of product alike.

 

Ordinary Road Marking Machine places its hopper on the right hand of the moving direction,while Left Hand Road Marking Machine places its hopper on the left hand. It is applied to High Way，closed roadway. And it also used for where Thermoplastic Kneader melting the coating material at front， several Road Marking Machine working towards to the same direction at high speed, and where side line marking is required, then an ordinary Right Hand Road Marking Machine and a Left Hand Road Marking Machine should be working at the same time. Left Hand Road Marking Machine also applicable to mountain road and slop road marking， working together with Right Hand Road Marking Machine, down to the slop, greatly reduced labour intensity.

 Road Marking Machine