Product Description

cbb*0 sh fan capacitor *0uF **0VAC 
Pass large current power striding connect
Series filter capacitors, vibrating capacitors, AC running motor capacitors, HID capacitors, fluorescent capacitors
Operating temperature: **5 to **5oC
Capacitance range: 1.0 to **0.0μF
Capacitance tolerance: J = ± 5%, U = + *0 to *5%, K = ± *0%
Rated working voltage range: **0 to **0V AC, *0/*0Hz
Withstand voltage test:
Dielectric strength test (TV):
Rated voltage x **5% for 1 to 5 seconds
Between terminals and case (TC):
Rated voltage x 2 + 1,**0V for one minute, at *5oC
Dissipation factor (DF): 0.5% maximum, when measured at 1kHz, *5oC
Insulation resistance (IR):
Between terminals: above 1,**0ΩF, at in **0V DC at *5oC
Between terminals and case: above *0,**0mΩ, at **0V DC at *5oC
Pull test:
Will sustain 2kg steady pull in the direction of lead egress and 1kg steady pull at any *0 degrees angle for *0 seconds
After test, capacitor shall show no evidence of damage and pass all electrical requirements
Damp-heat test:
Capacitor are subjected to an environmental test chamber at RH *0 to *5%, operating temperatures for **0 hours
After the test, capacitor shall be conditioned at room temperature for 2 hours and meet the following criteria:
Capacitance change shall be less than 3%
Dissipation factor shall be less than 0.2%
Insulation resistance shall be over *0% of the minimum requirement
Life test:
On/off: **0,**0 cycle ± 5,**0 times on 2 seconds off 2 seconds at operating temperatures with rated voltage
After the test, the capacitance drift 5%, dissipation factor 0.5%, insulation resistance *0%