Machine Features Guide rail base The guide rail bases are the box structure with reinforcing ribs. They are made of the HT**0 resin sand-making precision casting. And the castings are treated for internal stress relieving by twice, so it can maintain long term precision. Sliding plate、Ram The crossbeam sliding plate is the7 shape. There are four sliding blocks connection between sliding plate and guide rail. And there is one auxiliary box way to support. The crossbeam plate and ram use rigid sliding guide rail, so the rigidity and stability are very good. Crossbeam The crossbeam is the box structure with reinforcing ribs to improve the torsional rigidity. The crossbeam uses two linear guide rail and one auxiliary box way to support , which is the international advanced compound guide rail structure.(This is patented by NINGQING). This structure can not only meet rapid and precise moving , but can meet enough rigidity. The linear guide rail use the *5 heavy loading type. Suitable for big work piece Less floor covering Bigger loading. The work table is fixed, so the loading capacity is not limited. High-tech synchronous drive technology The crossbeam movement adapts the international advanced ultra precision synchronous drive technology, the position loop, current loop and the velocity loop. This can solve the different loading micro deviation because of single position loop. Compound crossbeam guide rail (Patent) There is the extra box way based on original linear guide rail on the crossbeam rail, which can improve the cutting resistance force and loading area. The patented designing can overcome the come weakness of cantilever among the gantry machine. Higher precise guide rail mounting surface The guide railing mounting surface is grinded by precision grinding machine, so the machine precision and work piece finish will be much better than fine milled mounting surface. Auxiliary lead screw support Special lead screw support by auxiliary guide rail and blocks, so it can reduce the vibration of the lead screw