Product Description

Email: *@********************br> Phone/wechat: ***6 **********8

Company introduction

Henan KBW Environmental Sci-Tech Co., Ltd cooperates with Machinery Research Institute of Henan Province. We devote to development and manufacturing of boiler cleaning equipment and pneumatic conveying equipment. Also, Good unites with famous companies like East Boiler, Haerbin Boiler, Kaifeng Desheng Boiler to provide solid foundation and strong technical support for the promotion of intelligent impulse shock wave soot blower. Shock wave soot blower is widely used for coal-fired, oil-fired, waste incineration boilers soot cleaning in oil, chemical, coal chemical, thermal power, cement, environment protection industries.



Shock wave soot blower introduction



During the operation of industrial boilers, fouling and coking on the surface of convection section is normal. Soot deposition has a thermal conductivity of only 0.***1～0.**6w/㎡·°C, while metal tube has *6.5～*8.1 w/㎡·°C. Soot on tubes would result in a higher exhaust gas temperature, lower boiler thermal efficiency, tubes erosion & leaking, sometimes, even a forced blowing out. Boiler cleaning equipment is required.



Pressure pulse soot blower is the newest type of boiler cleaning equipment. As a substitute product of long retractable soot blower (steam), short soot blower (steam), sonic soot blower, shock wave soot blower is a major breakthrough for boiler tube cleaning.



It uses the detonation impulse technology to clean the convection section of boilers, such as superheater, reheater, economizer.



After the application for various boilers, impulse dry cleaning method has replaced traditional steam wet cleaning method. Shock wave soot blower has solved the problems caused by steam soot blower and sonic soot blower. Steam blowing increases the humidity, which is potential damage for the tubes. Sonic blowing has a relatively lower energy and not efficient for different types of deposits.



Shock wave soot blower improves the cleaning efficiency greatly, reduces tube erosion rate, lowers maintenance, improves thermal efficiency, reduces operation cost.



Working principle and features



Combustion gas (coal gas, natural gas, ethyne, liquefied gas, etc.) is mixed with air to some percentage. On the base of turbulent flow status and adjustable impulse frequency, mixed gas detonation would generate powerful wave airflow, together with shock wave and thermal radiation. Shock wave soot blower uses the kinetic energy, sound energy and thermal energy to clean boiler.



For different boilers, soot fouling is different. According to different situation, the ratio of combustion gas and air varies. Therefore, generated pressure would be different. But it is limited within safety range, instant energy at the nozzle is about 0.6MPa.



Advantages of shock wave soot blower

1.    A multi-site cleaning solution

2.    Unblock clogged up silos, hoppers & bins

3.    Reduce health & safety risks

4.    Rapid reliable equipment

5.    Low to no maintenance

6.    Fully automated

7.    Prevent ash build-up on boiler tubes

8.    Eliminate tube corrosion and erosion

9.    **0° cleaning

*0.    No costly maintenance