Product Description

Shotcrete Machine Steel Sealing Plate

Other Names:Steel liner plate; Steel Liners

Product Introduction

Other names: wear plates, wear-resistant liner, also known as pressure plate, seal plate, combined with



boards, friction plates, rubber combination plates, rubber seal plate.

Categories: Due to the rotor body have up and down both sides, so divided into up and down steel liner



plate, up wearing plate and down wearing plate plate , up sealing plate,down sealing plate,up combined



plate and down combined plate.

Material: high manganese steel, stainless steel.

Application: with rubber plate supporting the use of the upper and lower sides of the rotor body used,



make the seal function.

Scope of application

Shotcrete Machine Steel Sealing Plate, as wearing parts of spraying machine, the use is quite extensive,



each spraying machine is equipped with two steel liner plate and just like rubber sheets,supporting the



use of each other. The holes on the outer ring of the liner is called material holes, and on the inner



ring is called vent holes, and the distance between the edge of the vent holes and the edge of the



material holes was no more than 10 mm.

Shotcrete Machine Steel Sealing Plate is the main component spraying machine for grinding gravel, and due



to the abrasion for grinding  easier to grind strip groove on its surface, so causes severe leakage on



the joint surface, so pressure is reduced and it can not spray any more, so you must change a new one.

Technical feature

The latest production technology, the latest formula made of special material, high hardness, high wear



resistance, smooth surface, making the equipment to achieve the best sealing. In reducing dust and rebound



rate, reducing the combined board losses have achieved significant results, in the course of good wear



resistance, no distortion, no broken, can improve mill productivity, reduce mill downtime, its life is 3-5



times of ordinary high-manganese steel, the use of time of up to 1000 hours, is the rotor body shotcrete



machine with a more ideal liner.

High manganese steel characteristics: high manganese steel with good ductility and toughness, the impact



force generated on the surface hardened layer, the hardened surface layer is worn after a new surface



layer, and continues to be hardened. Therefore, high manganese steel castings with high surface wear



resistance, which some still retain the original mechanical properties.