Product Description

 The silicone gifts  bracelet molding machine centralized control system, with adjustment, hand and semi-auto operation modes at operator's choice. Fixed stroke forming process or fixed pressure forming process selected through control panel, with pressure hold and time delay functions. The operating force, no-load traveling and, low-speed movement and travel range can be adjustable subject to technological requirements.

The characteristics of  silicone gifts  bracelet molding machine

1.Adopt the world advanced SOLIDEWORK3Dsoftware and finite element analysis of mechanical design,the optimum design is? integrally molded high rigidity,precise structure,long service life.

2.Heating plate adopt deep hole processing,and after carburizing,after grinding nitriding,using the principle of heat,get the high precision,and the optimal design with average temperature,HRC****5 hardness,long time wear-resisting,Not easy to be out of shape and it has high plane precision.

3.Using the technology of planar pressure correction, the maximum pressure(**0KG) nut leveling device,the highest plane precision can reach 0.*5 MM.

4.Unique oil circuit design,the oil circuit non impact and low noise in operation,increase the effectiveness,reduce the energy consumption.

5.Using circulation radiation cooling device,to ensure good heat exchange,low oil temperature,long life hydraulic parts,stability forming.

6.Intelligent PID control output,the difference of set temperature and actual temperature controlled in**1 degree.It is economic and energy-saving.

7.Importing the latest digital prototype testing technology,higher thermal performance,better stability than the traditional design.

8.Adopt imported famous brand digital temperature control,the precision of temperature controlled in **2 degrees the program has a week preheating function.

how to make the silicone gifts  bracelet:

1.Maxing the pigments and liquid silicone by using the stirring machine ,in order to get the mixture ,at

the same time, put the pigments and solid silicone into the gum machine, for getting the mixture ,too.

2.liquid and  solid silicone and pigments had mixed ,and the liquid silicone need to vacuum, and the solid silicone need to use the cutting machine .

3.filling the mold with liquid silicone by dispensing machine (the logo of the mold  can design by yourself),

and then need to use the vacuum machine to deflate.

4.put the solid silicone into the mold (with filled by liquid silicone).

5.put  the mold into the hydraulic machine to press about 1min(adjustable),the working principle is thermoforming.

6.finally, just open the mold and finish the phone case,put the mold to the automatic cooling table.