Product Description

SILVER MIRROR
Virtually all mirrors for interior use are manufactured by the conveyor, wet deposition method. Annealed or fully tempered glass is thoroughly cleaned by the application of cleaners and passing contact with oscillating scrub brush units. After the glass is cleaned and rinsed, the surface of the glass is sensitized with a diluted solution of tin chloride. This surface treatment allows for the deposition of silver. Silver nitrate is sprayed onto the sensitized surface of the glass along with other chemical configurations. The final outcome is the formation of a uniform silver layer on the glass.
Once the silver layer is formed on the glass, methods to protect the silver layer from oxidation are employed. A layer of copper is then deposited directly onto the silver. Copper can be applied in two ways: chemically or galvanically. Recent technological advances have lead to the development of copper free protective films, which also prevent silver oxidation.
Once the metal layers are attached to the glass, they are covered by a protective mirror backing paint. The mirror backing paint protects the metal layers from corrosion and from mechanical scratching. The paint can be applied either by passing the glass through a curtain of paint or by passing glass in contact with a roller paint coater. There are many mirror backing paint products available from a number of suppliers. They offer paint systems that are applied as a single coat or double coat. Both coating systems are effective

mirror stock size mirror from 2mm ~***** sizes are as follows:
***0****0MM  ***4****4MM   ***0****0MM   ***0****0MM
***4****0MM   ***4****0MM   ***4****0MM
Some special sizes according to your requirements can be customized.

Packing: 1) Iron racks for domestic market; 2) Sea-worthy wooden crates foroverseas market;