Product Description

~Our STC mast climbing work platform is a good solution for work on facades of high and super high rise buildings. It is suitable for facade painting, cleaning, face brick mounting, curtain wall installation, welding of external wall steel structure, and more. The mast climbing work platform is especially great for construction applications where installation of suspended scaffold is impossible or high operating stability and safety is required.

Features of Mast Climbing Work Platform

1. The length and width of our mast climbing work platform are adjustable, so as to suit building's different facade shapes. In addition, some parts of the work platform are telescopic. This enables the platform to be combined into concave-convex shape that fits the building external wall shape, thus better meeting the work requirement.
 2. The use of our mast climbing work platform involves no base prefabrication, which greatly facilitates change of work locations.
 3. This construction equipment is equipped with many protection devices.
 a. The electrical system is designed with creepage, overheat and phase sequence protectors.
 b. The work platform uses auto reset upper/lower limit switch and ultimate limit switch without auto reset function, which provide double protection to avoid overtravel at the top and bottom.
 c. The overload sensor helps eliminate over-torque operation of the mast climbing work platform.
 d. The double mast climbing work platform has an automatic leveling mechanism to automatically adjust the synchronous lifting operation of the two drive devices of the double mast, which can effectively control the work platform tilt. The vertical tilt angle is controlled within 2 degrees.

TECHNICAL DATA OF SINGLE MAST CLIMBING WORK PLATFORM
MODEL
STC**0

RATED LOAD WHEN THE PLATFORM REACHES ITS MAX. LENGTH
***0 kg 

MAX. CARRYING CAPACITY
3 persons 

RATED LIFTING SPEED
8.3 m/min 

MAX. OPERATING HEIGHT
**0 m 

THE DISTANCE ABOVE THE LAST TIE-IN
4.0 m 

MAX. LENGTH OF PLATFORM
8.8 m 

BASIC PLATFORM WIDTH
1.5 m 

MAX. PLATFORM WIDTH AFTER EXTENSION
2.5 m 

THE FIRST TIE-IN FROM THE GROUND
**4 m 

TIE-IN SPACING
about 6m 

STANDARD SECTION SIZE
***8x**0x**0 mm 

MOTOR MODEL
TYHI**0L **4 

MOTOR POWER
2x2.2 kW