The SL****0MPB automatic die
cutting and creasing machine with stripping station is pivotal
equipment, which is designed for die cutting, creasing and cold
embossing paper products such as box, carton, label etc. Advanced
drive gears are adopted such as high precision index, pneumatic
plate-lock, pneumatic clutch, overload protection, electric
pressure adjustment system, ensuring stable performance at high
speed running.
The machine is equipped with
pre-loading unit, vice feeding unit, speed variable conveying
mechanism, automatic vice delivery mechanism, pneumatic sampling,
auto timing lubrication system, main dive gear chiller, etc.
exerting the machine to work its full potential.
Electrical components and driving elements are all of
internationally famous brands to ensure die cutting precision and
reliability of running. Electric control system monitor the
operation state of the whole machine and revealed through the
man-machine interface by PLC, electronic cam and photoelectric
switch, which is convenient for fault diagnosis.
Man-machine interface monitors
machine state, displaying running instruction, trouble location,
troubleshooting to fully actualize man-machine communication.
Industrial refrigerator of electrical cabinet ensures that electric
components work stably under constant temperature.
This machine is designed and Manufactured by
Higher Shengli Machinery based near to Beijing in China. It is
designed to efficiently convert various grades of paper and carton
at high speed with minimal set up times and for ease of
operation.
Standard features of each section of this
machine：
1).
Feeder:
Stream fed top feed suction unit with a Max speed of
***0 Sheets per hour.
Pre-loading and secondary hoist system to allow
continual running during pile changes.
Photo electric sensor protecting foot trap point at
feeder table lower position.
Feeder table will accept standard pallet or pre-loading
unit.
Adjustable air blow enabling efficient sheet separation
on the full range of raw materials.
Both push and pull side lays on both the near and off
side of the
machine.
Side lays fitted with electronic detection to
prevent registration errors of badly position sheets.
Double-sheet detection device fitted on the lay
board.
High specification Japanese Nitta feeder belts for
maximum stability during sheet transfer.
Electronically controlled feeder pump, ensuring
accurately fed sheets to the front lays.
High efficiency/ low maintenance Becker vacuum
pump.
2).Press
Section:
Fully adjustable multiple front lay with electronic
detection device to prevent registration errors.
Standard cutting rule height. (*3.*0mm)
7mm thick high Rockwell hardened steel plates.
(optional)
Or 5mm thick hardened steel plate combined with a 2mm
hard or soft plate facility to allow matrix to be saved on
regularly run products.
Overload protection device avoid crashes caused by
overload.
High specification, heat treated steel drive Worm and
bronze Wheel main drive. Toggle action die cutting movement.
Photoelectric sheet detection at every stage of the
sheet transfer throughout the machine.
Standard 2x cutting chases complete with hardened steel
chase backing plates (Centerline designs included as
required).
Gearbox lubrication chiller unit that ensures optimum
bearing temperatures at high speed production.
Lightweight aluminum alloy gripper bars complete with
pinch grippers.
Japanese high strength extended pitch gripper bar
chain.
Taiwanese Teshi precision indexing cambox drive for
high precision and high speed gripper movement.
Imported high precision synchro drive belt and
pulleys.
European Pneumatic clutch and brake unit.
3.)Stripping
Unit:
Removable stripping frames which allows easy and quick
installation of tooling.
Frames can be manufactured to accept Centreline
stripping tooling.
Three movement stripping frames system that allows the
most intricate of products to be stripped effectively at high
speed.
Lower pin frame and stripping pins are supplied as
standard.
4.) Delivery
Section:
Delivery front and side jogging, to ensure a neat stack
on the delivery table pallet.
A sheet sampling system that allows a sheet to be
easily removed during production to check cutting and registration
to print.
Tab inserting unit to enable delivered product to be
removed in accurate batches. (optional extra)
Quick pile change / non-stop running delivery
facility.
Photo electric sensor protecting foot trap point at
delivery tables lower position.
5.)
Electrical:
Main machine is controlled by Mitsubishi PLC controller easily
accessed and repaired in Europe.
Main motor speed control inverter manufactured by Yaskawa
Japan.
Machine control encoders and programmable cam positioner
Manufactured by Omron Japan.
Interlocking type guard switches used on all machine guards in
conjunction with safety relay.
|
Max. sheet
size |
***0×**0mm |
Min. sheet
size |
**0×**0mm |
|
Max. die cutting
size |
***0×**0mm |
Min. Gripper
Margin |
5mm |
|
Die Cutting
Precision |
±0.1mm |
Max. die cutting
pressure |
**0T |
|
Sheet
specification |
*******0g/m2 |
Corrugated
board |
≤4mm |
|
Max. die cutting
speed |
***0P/H |
Max. speed with
stripping |
***0P/H |
|
Feeding Pile
Height |
***0mm |
Delivery Pile
Height |
***0mm |
|
Total
power |
*1KW |
Main Motor
Power |
*1kw |
|
Overall
size(LxWxH) |
***0×***0×***0mm |
Total
weight |
*1T |
Remark: overall dimension
with pedal and preloading unit is
***0X***0X***0MM.
