Product Description

Application of snap action thermostat:
Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat.

Electrical parameters:
1)CQC, TUV, UL, cUL AC**0V *0~*0Hz 5A/*0A/*5A
2)UL AC**5V *0Hz *5A (Resistance load)
2. Action temperature range: *5~**0 (Optional); Temperature accuracy: ± 2 ± 3 ± 5 ± *0
3. Recovery and action temperature difference: 8~**0 (Optional)
4. Connection method: Insert the terminal **0# (bending angle: 0~*0° Optional); Insert the terminal **7# (bending angle: 0~*0° Optional; Thickness: 0.5, 0.8mm optional)
5. Lifespan: ≥ **0, **0 times
6. Electrical strength: No spark or breakdown for 1min at AC *0Hz ***0V
7. Contact resistance: ≤ *0MΩ
8. Insulation resistance: ≤ **0MΩ
Junction method: Constant-closed: The contact point disconnects when temperature rises; And contact point connects when temperature falls;
Constant-opened: The contact point connects when temperature rises; And contact point disconnects when temperature falls.
*0. Casing protective class: IP*0
*1. Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device.
*2. Installation method: Installed for KI**1 series: General moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole.

Structure:
KI**1 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; The contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; Open/close the contact point; Disconnect/connect the circuit; Thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state.

Passed Certification
CQC TUV UL cUL