Product Description

WS�L5&#****8;A&#****9; Street Lamp Controller Fitting for the solar lighting system is automatically controlled below *0W (*2V) or below **0W (*4V) for both lighting and solar panel. Specializing in primary light and secondary light double way output. It uses the newest patent products of ours. I Function: 1, Preventing battery from over charging, over discharging and Reverse-Current during nights. 2, Controller will start up the lighting system in the evening automatically according to the intensity of the light 3, Controller will shut down the lighting system according to the time setting or shut down the lighting system automatically when it is dawn II Connection (See the drawing below): Opening the top cover of the controller, connect the wire and terminal of the controller according to the drawing on the top cover of Controller. 1. Connect the �+�, �- � Poles of the battery to the relevant terminal of the controller (the third one and the fourth one from the left) firmly and correctly. 2. Connect the �+�, �- � Poles of the solar panel to the relevant terminal of the controller (the first one and the second one) firmly and correctly. 3. Connect the �+�, �-� Poles of the load to the relevant terminal of the controller (the fifth one and the sixth one from the left) firmly and correctly. III Indicator LED 1. One piece of Charge Indicator LED (mark: Charge). When it is bright, the battery is charged strongly, flickeringly means floating charge, no light means stop charging. 2. One piece of Load Indicator LED (mark: Load). When it is bright, there is output and load can work; if LED go out, means there isn�t output and the load cannot work. Attention Items: 1. before connection, please check and confirm the rated voltage of the solar panels, batteries and the loads carefully. These must be same rated voltage, all *2V or all *4V. 2. The rated current of the solar panels and the load must be less than the rated current of the controller. The Parameter Sheet: