Specification
1) Inter tank: SUS ****2B food grade stainless steel with thickness of 1.0mm*2.0mm
2) Out tank: Stainless steel/galvanized steel/colour steel
3) Capacity: ******0L
4) Evacuated tubes: Dia. *8mm****0mm/**0mm with heat pipe/U pipe
5) Insulation layer thickness: *5 mm
6) Bracket: Galvanized steel with thickness of 1.5mm*1.8mm
7) Heat preservation: *2 hrs
8) Hail resistance: *5 mm
9) Working pressure: 0.6 MPa

Features:
- Heat collector separates with storage tank, the tank can be put in any place of house, and the collector can be installed on the inclined roof or flat place.
- Modularized design, arbitrary combination, harmony with the buliding perfectly.
- Intelligent control and automatic operation.
- Anti- freeze: No water inside the tubes when it works, the system controller has the anti-freezing function is that the temperature circulation will operate while it reaches teh fixed temperature.

Working Principle
The Split pressurized solar water heater is a split system, where the collector is separated from the storage tank. It is flexible assembly, combined with building perfectly. The system consists of storage tank, solar collector and working stationsSolar collector gathers energy and heat the medium material in the copper pipe, the medium transfers the heat to the water in pipeline the solar collector. When there is temperature difference ( settled by customers) between the two sensors in collector and tank respectively, intelligence controller activates the circulation pump automatically, and forces the flow of heat medium in the pipeline and do heat exchange with the water inside the tank via copper coil in the storage tank. In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device.