Product Description

PU court Components: It's made of polyurethane (PU), and mixed with EPDM granules or SBR granules. low maintenance, environmentally- friendly. Description: PU sport court’s total thickness is 4mm and it’s made of Sport Court Polyurethane. There are many colors to meet different sports use. Anti-slip, resilient and shock absorption: safe for all sports use. Anti-aging, U.V: especially suitable for outdoor sports Abrasion resistance provides long life expectancy. Overseas installation is available. Application: Polyruethane(PU) rubber court is applied in different kinds of court, ***** basketball , tennis ball, volleyball and so on. It can be constructed on the concrete and asphalt and polyurethane court can be packed in the cylinder. Because every cylinder have been marked the mixing ratio instruction on the cylinder surface. It's easy to construct for each layer on the cement or asphalt Silicon PU Court Description: Silicon PU court flooring used for all kinds of courts. Silicon PU Court flooring (New Type) *Subbase: Cement, asphalt layer or other hard ground. Features: 1. According to the technical characteristics of ball games, it guarantees easy starting, quick moving and prevent the injury from cushion for athletes. 2. Excellent weather resistance and durability keeps color fresh for a long time even under the condition of UV, rain water, high temperature or else. 3. Easy to clean and no need for special maintenance because Silicon PU is composed of organic silicon, which is dustproof. 4. Silicon PU is one component PU material, which uses water as curing agent, so it is environmentally-friendly material. 5. It can be paved on old or new concrete ground and reduce the cost of base treatment. *Application: Indoor and outdoor basketball courts, tennis courts, volleyball courts, badminton courts, gym, playground or colorful elastic ground. Acrylic Acid Court Content： 1. Surface Preparation 2. Required Materials The materials used for the ColorPlus System for Concrete Substrate are as follows: Primer Level Master Coat Line Paint 3. Application of Primer It is suggested to apply only 1 coat of Primer. The undiluted coverage rate is approximately 0.*5kgs per square meter, per coat. The practical quantity depends on the smoothness of the surface. 4. Application of Level Master It is suggested to apply minimum 2 coats of Level Master. The undiluted coverage rate is approximately 0.*5kgs per square meter, per coat. The practical quantity depends on the smoothness of the surface and the different sizes of the added sand. 5. Application of Coat It is suggested to apply 3 coats of Coat. The previous two coats is incorporated with sand (texture coat), the third coat can be applied directly (finish coat). The undiluted coverage rate for the texture coat is approximately added with sand: 0.2kgs per square meter, per coat, added with Base: 0.**6kgs per square meter, per coat, while the undiluted coverage rate for the finish coat is approximately 0.*5kgs per square meter, per coat. The practical quantity depends on the different sizes of the added sand. 6. Application of Line Paint It is suggested to apply 1 coat of Line Paint. Approximately 3.*5kgs is needed for a standard tennis court. 7. Completion Courts can only be put into use after *4 hours when the work comes to an end. Upon completion, the constructor shall insure proper removal of all construction debris, surplus materials, empty containers and wash water, and shall leave the site in a condition acceptable to the owners. The court is to be left secure so as to prevent vandalism. Base material of court The material is double-component adhesive. Feature: Environmental protection, stable, durable Imported raw materials