Product Description

DESCRIPITION SPECIFICATION Spring coil High-tension carbon steel grade II wire 1.8mm thick. Springs Pocket coil springs, heat tempered having barrel shaped design so that the turns never touch each other, eliminating noise and vibration. The minimum free height of these barrel springs is **0mm with 6 turns and having a centre spring diameter of *5 mm, top and bottom diameter of *0 mm. Springs count Approx. *2 springs per ***** Non-woven pocket These barrel springs are compessed and packed into individual sleeves of spun bonded polypropylene of**0 GMS. Each sleeve is sealed using a process where fibers are melted together to form solid plastic vertical/horizontal seams that are rearkably secured and tear resistant. Compressed pocketed springs The compressed spring height varies with the thickness of the mattress . Height attained by the spring in compressed position: for **0mm (8") thick mattress - **0mm / 6 Turns Border Edge Border wire is of 4mm thick high-tension carbon steel, grade II wire. A cage like structure is formed so that the springs are not allowed to move freely and a proper rigidity is mantained in the mattress. Insulator Non-woven lining of high density is provided between the padding and the spring unit. Attachment of barrel springs & insulator to the border wire Insulator is put on both sides of the spring unit. The spring unit & insulator are attached to the border wire through copper coated steel 'C- hog' rings. Padding Various types of foams with different thickness is provided. For example: Hard compressed felt, high density P.U. Foam, **0% Natural latex rubber, Egg cut tray foam, molded foam etc. Fixing of padding layers to the spring unit The synthetic felt is fixed to the spring unit through copper coated Steel 'C-Hog' ring, which goes along with the border wire after every 1½ inch. This maintains the shape of the ***** foam sheets/latex foam layer is fixed to the synthetic felt using good qualityadhesive.