Product Description

User Manual According to the operating load, select the suitable cylinder bore size. Before screwing the correct fitting in, make sure the thread ports and fitting are clean. Be aware of dust or fitting tap falling into the cylinder. It is suggested to use the medium lubricated by *0μ filter element. Under the high-temperature environment, use the high-temperature type cylinder. Under the low-temperature environment, take measure to avoid frozen. In order to prevent damaging the cylinder, test the cylinder. In order for the cylinder to achieve long service life, do not side-load cylinder. If the fitting were removed from the cylinder for a period of time, be sure to block the thread port with protecting cap to keep the dust away. Specifications: Bore(mm) *2 *0 *0 *3 *0 **0 **5 **0 **0 Operation Double acting Fluid Air *Mounting Basic FA FB CA CB LB TC TC-M Operating pressure 1.0~9.0kgf/cm2 (0.1~0.9MPa) Proof pressure *3.5kgf/cm2 (1.*5MPa) Operating temperature 0~*0 Operating piston speed *0~**0 mm/s Cushioning Adjustable cushioning Cushioning stroke *0 *6 *5 Port size G1/8 G1/4 G3/8 G1/2 G3/4 * SCD, SCJ mounting: FA, FB, LB, TC & TC-M Mounting: LB: Front and back fixed FA: Front cover fixation (Front flange) FB: Back cover fixation (Rear flange) CA: Back cover fixation (Single Clevis) CB: Back cover fixation (Double Clevis) TC: Centre Turnnion TC-M: Swinging type attaching foot seat