FOB Price
Get Latest Price|
- Minimum Order
Country:
Saudi Arabia
Model No:
00
FOB Price:
Place of Origin:
ksa
Price for Minimum Order:
-
Minimum Order Quantity:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Product Group :
-
Saudi Arabia
Contact Person Mr. Mamdouh
Second Industrial City, Dammam, Other
DESCRIPTION:
T-ULTRATHERMA range is a general use polymer modified bituminous
waterproofing membrane. The compound developed from good quality
resins blended with high quality Straight/penetration grade Bitumen
& special additives to enable as suitable product to weather
resistance, waterproofing application. It is specially formulated
& designed for low temperature areas use to protect the
substrate from heavy cold weather deterioration, this is ensured by
in house tests for enhanced Performance to show very good cold
flexibility, Impermeable to water.
FEATURES:
*Good weather resistance properties.
*High build compound ensures stability of the product.
*Good elongation & recovery properties.
*Adequate flexibility at cold temperatures.
*Superior bonding to concrete, masonry substrates and at seams.
REINFORCEMENT &SURFACE FINISH
It is produced with **0 gm /m2 Spunbond non-woven
polyester.
Polyester core to have high value of tensile strength
Elongation, Tear strength & Lap joint strength.
The membranes are produced in 3mm, 4 mm thickness
standard length *0 meter and width is 1
meter wide.
Top side TAJ Logo printed P.E Film with Embossed surface
Bottom side plain P.E�� Film covering
�
�
�
USES:
T-ULTRATHERMA
app bitumen membranes are Torch Applied & ideal for general
roofing, waterproofing application. On low slope concrete roofs,
weather protection layer on roof sheet, multi car parks, foundation
concrete underlayment Waterproofing, sewage work and any cemented,
concrete flat surface requires waterproofing.
APPLICATION:
Surface must be free from oil, grease, tiny debris particles and
nails. Give a coat of TAJ Bitumen Primer on the cleaned Concrete
substrate at the rate of ******0 gm/m2.The primer
must be allowed to dry completely before application of the
membrane.
T-ULTRA
THERMA APP membranes are fixed by torch
welding.
The method is easy to the trained Applicator.
The membrane rolls are lined up and spread open over the area to
which they are to be laid once the rolls are laid, so that the next
overlaps.
The first by *0 cm alongside lap. The membrane is then rolled back
without changing origin, it is then unrolled again while heating
the underside carefully and sufficiently to form melted compound
.End of roll joints should overlap a min.*5 cm.
Avoid uneven and excessive torching on surface. The lap joints can
be heated from top side to produce thin bed melt compound at the
seam, which can be smoothened by trowel to ensure properly welded
joint
�
TECHNICAL DATA T-ULTRATHERMA
PROPERTIES | TYPICAL VALUES | TEST METHOD | ||||||||||||||||||||
� Thickness nominal ,mm |
� 3mm, 4 mm |
ASTM D
**1 UEAtc |
||||||||||||||||||||
Roll length | *0 meter | � | ||||||||||||||||||||
Roll width | 1 meter | � | ||||||||||||||||||||
� Penetration [*]@********************ong> |
� *9 � *4 |
� ASTM� D� 5 |
||||||||||||||||||||
Softening point� deg.C | ******2 max | ASTM� D� *6 | ||||||||||||||||||||
Water� absorption [Wt]� % | < 1% | ASTM� D **0 | ||||||||||||||||||||
Heat� resistance
Related Products Taj International for InsulationSend a direct inquiry to this supplierGet Verified Buyers & SuppliersAvail Free Consultation |