Product Description

A polymer not suijected to deformation and highly resistant to loads and high temperatures. it offers considerable advantages compared to metals or other kinds of plastics which are unable to withstand high temperatures or heavy loads. torlon is material lighter than other, it is not subject to corrosion, and it does not require lubrication. it is compact and thogh, and it can with stand strong compression, distortion and impacts. it is resistant to abrasion and hydraulic fluids, hydrocarbons and combustible gases..

Because of these characteristics, Torlon is the ideal material for many industrial applications, such as pneumatic and hydraulic valves, nautical accessories, bearings for linear movements, and control valves. torlon , due to its low weight and inertia, ensures faster response to pressure changes compared to metals and better seal at low pressures. as they are self-lubricating, torlon balls are not subjected to attack by impurities or fats which could impair performance.

Torlon ***3 L contains 3% of pigment and 0.5% of additive. Torlon ***1 has been designed for high friction and abrasion conditions and contains *2% of graphite powder and 3% of additive.

Breaking point test with parallel plates (also known as the compression strngth critical point test): This test determines the maximum load at which a critical breaking or total fracture point can be observed on the sample being examinated. Aloads is applied to the upper plate of a device that carries out the test at a rate of 1.3mm/min until the critical point is reached.

The maximum load and deflection under stress values are obtained from a reading of the data recorded by the machine during the test and permanent deformation or set in measured under load. the values obtained represent a mean value for a sample of *0 item tested.