Product Description

* Ideal for use on tracers attached to pipes. Also for valves, elbows, or anywhere there is a desire to maintain temperatures above and below ambient. * Application: No mixing necessary, ready to use from the can. Spread a thin layer approximately 1/8" thick with a hand trowel to completely cover tracer (not entire pipe). It is optimal to remove loose paint, rust, scale, grease, etc. with wire brush before applying Tracit. * Curing: Once Tracit is applied, curing may be expedited by applying heat up to **0°F when necessary. Otherwise, allow mastic to air-dry ****8 hours or until completely hard before heating above **0°F. Do not heat hot enough to form steam during drying or to cause Tracit to boil, as this could cause cement to become porous and give poor heat transfer. * Minimum temperature for application: *2°F * Maximum usage temperature limits: **0°F (**0°C) * Minimum usage temperature limits: ***0°F (***2°C) * Thermal conductivity: *0 BTU in/hr sq. ft degrees F * U range: ****0 BTU/hr sq. ft degrees F * Container sizes: 1 gal., 5 gal., and quart cans * Shelf life: **2 years from date of manufacture in airtight container. * Weight: *5 lbs/gal. * Soluble: Yes * Harmful vapors: None * Bonding strength: ******5 lbs sq. in * Can be used with or without Chemax galvanized covers. * Typically a stock item * Tracit***0WW should be requested when thinner viscosity is required.