Product Description

Usage: Filling for LED, LCD electronic display, circuit board. Description: Applications: It is applicable to sealing, bonding and coating for electronic parts. 　　HY***0 is two-component room temperature vulcanization silicone rubber, which has low viscosity, easy mixing and pouring, is applicable to bulk pouring with excellent electrical performance. Standard Datasheet: Model HY***0 Type General purpose Components A B Appearance (liquid) transparent yellowy Mixing ratio (%) **0 5 Viscosity (Pa.s) 1~2 0.**5 Pot life(*5℃) (mins) *0 Curing time (H) 2~8 Hardness shore A *0～*0 Tensile strength (Mpa) 0.5～1.5 Elongation at break (%) *0～*0 Dielectric strength (kv/m*1) *8 Specific inductive capacity(1MHz) 2.8～3.2 Breakdown voltage (******1) *5 Volume resistivity (Ω) 1×***4 Dielectric loss factor (1MHz) 1×***3 Features: 　　The product has sticky viscosity, low shrinkage and non-corrosive; the silicone rubber can be used for a long period at the temperature of **0℃～**0℃ with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing. Using Instructions: 　　Mix the component A and component B evenly according to the proportion, and can be poured after deaired the bubbles. The surface will cure in about 2 hours after pouring. Clean and dry the electronic element to be poured; The silicone rubber should be deaired the bubbles after pouring at the room temperature. Package, Storage and Precautions: 　　1. The product is in *0KG and 5KG plastics barrels. 　　2. The product, which is a non-hazardous, should be stored at a cool place to avoid the sun and rain.