Product Description

Scope of Application
TXQ6 Automatic Transfer Switch, TSE-type PC-class; for power supply system of AC *0Hz, AC rated voltage of **0V, rated current of ***0A, three-phase four-wire.
To achieve automatic and manual switching between common and standby power supply, in the process of switching power supply, to cut off the power supply to the load.
Used for the occasion with requirements of two-way power supply and high power quality. There are *6A~**0amp automatic transfer switch and **0A~***0A switches produced.
TXQ6 Automatic Transfer Switch complies with GB ****8.3 and GB ****8.*1, IEC ******3 and IEC ********1 standards.
 
Normal operating conditions and installation conditions
1. The ambient air temperature is not higher than **0 ℃, not lower than *5 ℃.
2. The altitude of the installation site shall not exceed ***0m.
.3 Humidity: the maximum temperature of **0 ℃, the relative humidity of air does not exceed *0%, at a lower temperature can allow a higher.
Relative humidity, for example *0% at *0 & lt; 0 & gt; C. Special precautions should be taken for condensation that may occur occasionally as a result of temperature changes.
4. The pollution level of the surrounding environment is Grade 3.
5. Switch should be installed in the absence of significant shaking, shock and no rain and snow invasion of the place, while the installation site should be no explosion hazard medium, and the media is not enough to corrode the metal and damage the insulation of gases and dust.
 
Main parameters and technical performance