Product Description

Anti-abrasion: the abrasion value of UHMWPE pipe is 1/4 of steel pipe, 1/3 of HDPE pipe under same working conditions. Water hammer resistance: UHMWPE pipes have strong enduring capability to the impacts from various sands, mud and slurries. Corrosive resistance: Higher structure stability, corrosion resistant to various chemical mediators. No electrochemical corrosion, no need anti-corrosive coating. Self-lubrication: The roughness of UHMWPE is 0.****2mm. The pressure loss of UHMWPE pipe is 1/*0 of steel pipes, 1/7 of nylon pipes. Over *0% of transfer efficiency will be increased. Non-scaling: the internal wall is very smooth, preventing the fouling on the wall and no influence to the production efficiency. Light weight: the density of UHMWPE pipe is only 1/8 of steel pipe. It is easy to move and install, especially suitable for the working sites at where the lifting machines could not work. Easy connection: flanges are available to connect the pipes, no need washers. The installation will be very easy and fast. There are no dangers and concerns of water leakage. Anti-aging: the UHMWPE pipes will not be aging in *0 years under hot sunlight, and it could work over **0 years if buried underground. Environment friendly: UHMWPE pipe is nontoxic, no bacteria, and no pollution to environment. Low carbon: the discharge of carbon dioxide during UHMWPE pipe production is only *5% of steel pipe production, which is good for environment protection. Temperature Resistance: UHMWPE pipes could be used under the temperature of **0°C—*0°C, and there is no deformation. Long working life: the working life of UHMWPE pipe is 4 times longer than steel pipe under same working condition. O.D. DN(mm) 0.4MPa 0.6MPa 0.8MPa 1MPa 1.*5MPa 1.*5MPa 2.0MPa Thickness mm Thickness mm Thickness mm Thickness mm Thickness mm Thickness mm Thickness mm **0 4.7 6.0 7.4 9.2 *1.4 **5 5.4 6.7 8.3 *0.3 *2.7 **0 6.0 7.7 9.5 *1.8 *4.6 **0 5.2 6.9 8.6 *0.7 *3.3 *6.4 **0 5.9 7.7 9.6 *1.9 *4.7 *8.2 **9 6.5 8.6 *0.8 *3.4 *6.6 *0.5 **5 4.9 7.3 9.7 *1.9 *4.8 *8.4 *2.7 **0 5.5 8.1 *0.7 *3.4 *6.6 *0.6 *5.4 **0 6.2 9.1 *2.0 *5.0 *8.7 *3.2 *8.6 **5 6.9 *0.2 *3.5 *6.9 *1.1 *6.1 *2.2 **0 7.8 *1.5 *5.3 *9.1 *3.7 *9.4 *6.3 **0 8.8 *3.0 *7.2 *1.5 *6.7 *3.1 *0.9 **0 9.8 *4.6 *9.1 *3.9 *9.7 *6.8 **0 *1.0 *6.2 *1.4 *6.7 *3.2 *1.2 **0 *2.3 *8.2 *4.1 *0.0 *7.4 **0 *3.8 *0.5 *7.2 *3.9 *2.1 **0 *5.3 *2.7 *0.6 *8.1 **0 *8.0 *6.0 *8.1 **0 *0.0 *0.0 *2.1 ***0 *2.0 *3.0