Product Name

Structure

C-Frame ALL-Steel Workstation

Steel framework, Fashion style with simple installation and flexible budget

Custom-made

Dimension

Color

Worktop

1）*5 mm/*9mm/*0mm thickness EPOXY, Black Color

2）*3mm/*6mm/*0mm/*5mm thickness TRESPA , Black , Gray Color

3）**4 STAINLESS STEEL cover with *5mm thickness MDF or Particle board core

4）*9mm thickness WILSONART CHEMSURF/ Wilsonart Physurf/ Protector 

5）*9mm thickness Formica Chemtop

6）WORK TOP: *0mm thickness of Laboratory Ceramics whose surface highly resistant to chemicals and well-suited for laboratories using very aggressive products. This is an extremely hard material resistant to scratches and resistant to high temperatures. The color: Black

Advantage of the *0mm thickness Laboratory Ceramic Work Top:

a: Chemical resistant

b: Be able to resist instant temperature ***0℃ and there is no affect when temperature is up to **0 ℃.
c: Durable and scratch resistant
d: Resistant to UV light
e: Resistant to ageing
f: Free from solvents, non-toxic and completely recyclable

7) *0mm thickness Marble, Black Color

C-Frame Steel

Worktops shall be supported by heavy duty steel frame work. Frame work shall be made of appropriate sections as given below made of cold rolled mild steel of thickness 1.5mm minimum which shall be sandblasted and Epoxy powder coated. Framework shall be designed for safe loading of worktops of up to **0 kilogram per square meter and to keep service space between wall and under bench units. Frames shall be connected to each other by means of a front runner of at least 2mm thick size *0x*0mm. Frame shall be of rectangular box with a wall thickness of 3mm and at least of following dimensions.

Vertical member of minimum *0x*0mm

Horizontal top member *0x*0mm

Horizontal bottom member *0x*0mm

Other frame sizes will be subject to approval.

All frame work shall be sand blasted, primed and Epoxy powder coated in required color to a thickness of ******0 microns and hardened at **0 degree Celsius. Each cantilever leg shall have adjustable threaded foot of non abrasive material such as tough plastic, nylon etc.

Frame work shall be available in two heights, **0mm for sitting height and **0mm for standing height. Vertical member framework shall be with CNC punched slots for shelves/hanging cabinets. The total framework except for front and back shall be in one piece.

Cabinet

General Requirements:
It is the intent of this specification to provide a high quality steel cabinet specifically designed for the laboratory environment.

Cold Rolled Steel:
Cold rolled sheet steel shall be prime 1.0mm thick or 1.2mm thick; roller leveled, and shall be treated at the mill to be free of scale, ragged edges, deep scratches or other injurious effects.

Hinges:
Hinges shall be made of Type **4 stainless steel, with brushed satin finish, and shall be the institutional type with a five‑knuckle bullet‑type barrel. Hinges shall be attached to both door and case with two screws through each leaf. Welding of hinges to door or case will not be accepted. Doors under *6" in height shall be hung on one pair of hinges.