Product Description

Installing modifications UVB- 2 is designed for modified bitumen , including polymer- bitumen binders WSP to prepare the top layer of asphalt concrete , surface treatment of road surfaces , devices, protective layers of cement-concrete coatings, preparation of bituminous mastics elastomeric SEALING roofing materials and by introducing the polymers. Obtained at the bitumen meets specifications TU V.2.7 **4.******************2.

Installing bitumen modification is an article consisting of two reactors , mills, oil heating unit , supply unit bitumen control cabinet with the control system, process heating systems , the node adhesive additives unit plasticizer ( oil ) and equipped with a platform for loading the polymer. All major components shall be mounted on a metal frame .

Parameter Value

 

1. Capacity, m ³ / hr, at least **7

2.Number polymer 1m ³ source of bitumen, *0 ... **0 kg

3.Regime of work - cyclically-regular

4.Quantity of reactors - 2

5.Installed power, kW

- mill **5

- pump bitumen feed to the mill 7,5*7,5

- supply pump - pumping bitumen 7.5

- drive stirrer 2×5,5

- power heating water heater (total) 4×*7

- coolant supply pump 3

- Control system 0.8

- a plasticizer - supply pump 3

- pump feed additives adhesive 0.*5

- total **3.5

6. Parameters of electric current

- Voltage, **0

- Alternating with a frequency of *0 Hz

7. Dimensions (without removable for transport nodes) , mm, no more

- Length ***0

- Height ***0

- Width ***0

8. Weight, kg , not more than ***0