Product Description

It is a cheap solution for VGA extension as CAT5 cable is very cheap cost. It supports high definition up to ***0x***0. It is rack-mountable.
Features
- 1 channel VGA+AUDIO ;
- 1 channel VGA+AUDIO output;
- Connect a PC host in and 1 CRT PC monitor or LCD over **0 meters away;
- USB power supply and 9V DC power supply port for transmitter;
- *2V DC power supply for receiver;
- Transmission Media: UPT CAT5e Cable;
- Bandwidth: DC**5MHz;
- Differential coefficient plus<0.5%;
- Differential coefficient plus< 0.5?
- SNR: *0dB

Installation Guide:
Transmitter:
1. Connect VGA signal (to be send) to VGA IN
2. Connect audio signal (to be send) to AUDIO IN
3. Connect power supply plug to transmitter? ? S POWER
4. 5 reticle RJ*5 Insert TP-OUT
5. Setup all K is shut. Please make switch is ON (when transfer distance > **0m)
Notice: Setup position of switch K must based on transfer distance and image effect., still don? ? T satisfy image contrast after contrasting. Please setup switch K is ON

Receiver:
2 VGA displays can be connected at the same time. But the lighteness will reduce when 2 displays are connected in. Please adjust the contrast, brightness, color.

1. Connect display to VIDEO-OUT
2. Connect audio output to AUDIO-OUT.
3. 5 reticle s RJ*5 Insert TP.

CAT5e Cable:
CAT5e Cable should be parallel, can not appear cross over in twisted-pair. Seriation as follow: White orange / orange/ white green/ green / white blue / blue/white palm / palm.

Receiver adjustment:
Make the image look better via BRIGHT / CONTRAST adjustor
Still do not satisfy with the imagecontrast after you adjusting, please setup all switches K of receiver are ON
Lighteness, contrast, and switch K is OK for **0M transfer distance when leaving factory.