• Place of Origin: Guangdong, China (Mainland)
• Brand Name: XYY
• Model Number: poe switch XYY***2
• Output Power: 1 - *0W
• Output Type: Single
• Input Voltage: **0~**0v
• Output Voltage: *4V
• Output Frequency: *0/*0HZ
• Output Current: 1A
• Colour: black
• Led indicator: yes
• Ac plug: US/EU/UK/AU available
• Demension: *4X*8X*2mm
• OEM & ODM: accept

wall plug poe switch *4v adapter :

Input Voltage: **0~**0V

Output: *2V1A *2V2A *4V1A *4V1.*5A

AC plug: US/EU/UK/AU available

MTBF: *0,**0~**0,**0h

RJ*5 LAN - to LAN cable

RJ*5 Poe - to Poe device

Direct connection to ac power outlet

Dimensions: *4X*8X*2mm

Operating Temperature 0C~**0C

Storage Temperature **0C~**5C

Application:Router Board equipment, Power over Ethernet, etc.

Detailed picture of poe switch:

Quality Control:

6 full inspection:

1. Plug-in board full inspection : to make sure no components in wrong place, no reverse components, no components left, etc
2. Semi-finished products full inspection: to make sure no cold solder ,lack of components, no tin dross, no short-circuit, no open circuit, no bad led indicator ,no high voltage, no low voltage, no output, etc
3. Assembly full inspection: to make sure every unit with power ,without low voltage, without bad led indicator, low ripple, good appearance, with right cables, etc
4. Full inspection after burn-in: to make sure every unit with high temperature resistance, with power ,no bomb unit, no high voltage, no low voltage, no bad led indicator, etc
5. Finished products full inspection: to make sure every unit with power, no high voltage, no low voltage, no bad led indicator, low ripple, with right cables , no bad ultrasonic bonding, etc
6. Visual full inspection: to make sure no scratched case, no cracked wires ,no missing screw, no label misaligned, et

3 sampling inspection:

IQC (incoming quality control): According to AQL-MIL-STD***5E level II standard, to make sure raw materials up to international standard

IPQC ( process quality control): Tooling/fixture change or change over will do initial confirm,Position inspection will do per 2 hours. To make sure the whole production process under control, avoiding mistake in bulk.

OQC (outgoing quality control): According to AQL-MIL-STD***5E level II standard. To guarantee every unit in good quality before arrive at our customers.

**0% full load burn-in test for 1 hour, doing shock test per *0 minutes for *0 second. To make sure no bomb unit, every unit work at normal temperature, etc