Looks like you are not TradeKey.com's Member yet. Signup now to connect with over 9 Million Importers & Exporters globally.
Join Now, its Free |
Book call on your favorite time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Code
       


Beijing SKE Technology Co., Ltd

No 186,Litang Road,Changping Dist,Beijing,Beijing,China

View Phone Number

Free Member

WSY-08A Asphalt dynamic viscosity tester

Features: with a vacuum decompression system, digital display pressure, automatic constant pressure; imported temperature controller automatic to cont

Contact Now

WSY-04/04A Asphalt water content test device

Features: With electric heating units No open flame Heat quickly Withsingle and double connection Technical parameters: Distillation flask: 500ml Heat

Contact Now

SYD-0624 Bitumen toughness and tenacity tester

It can be used to test the toughness and tenacity of bitumen under specific conditions, in line with T0624-1993 requirements in the JTJ052-2000 standa

Contact Now

NDJ-1C Brookfield Electric rotational viscometer

The instrument is designed to test the surface viscosity of the asphalt road, can also test the viscosity of hot glue, paraffin polymer and other liqu

Contact Now

LDRS-6 Asphalt content tester by burning method

The tester is used to determine the asphalt content of asphalt mixtures. Automatically end point testing, the test accuracy of the asphalt content wi

Contact Now

LDZJ-1 Adhesion Tester

It is used to determine the required time for the safety solidity of the Emulsified asphalt slurry seal mixture, which is the open traffic time after

Contact Now

Bituminous pavement tester

The product is a special research project set up by Highway department of ministry of communications for the revision of "Technical specifications

Contact Now

ZH-J Wheel load tester

It is used to test whether there is too much asphalt in Emulsified asphalt slurry seal mixture, together with the wheel wear experiments to determine

Contact Now

LDHS-1 Asphalt solvent recovery apparatus

As an supporting instrument to the bitumen extraction instrument, it is used for re-separating the asphalt and trichlorethylene mixture to recycle tri

Contact Now

Fine aggregate methylene blue test mixer

This instrument is to test whether the fine aggregate has Expansive clay minerals and to determine its content, to assess the cleanliness of the aggre

Contact Now

LDSF-A Petroleum pitch four components tester

LDSF-A four components tester is used to test the asphalt four main components (saturated hydrocarbons, aromatics, colloid and asphaltene).

Contact Now

SYD-2801F High/ low temperature bitumen penetrometer

Penetrometer adds a set of high and low temperature water bath based on 2801E-type instrument. Water bath insulation pot can connect with high and low

Contact Now

TX-2 Program-controlled low temperature water bath

The water bath controls the constant temperature with a dual-zone automatic temperature adjustment method, with the features of precision constant tem

Contact Now

WNE-A Asphalt Zngler viscosimeter

WNE-A Asphalt Zngler viscosimeter Features: Standardwater value Digital thermostat Technical parameters: Temperature range: room temperature~95 Tem

Contact Now

WSY-072 Asphalt samples furnace

Features: sample cup, heating units, insulation shell, and the control box, with an intelligent digital temperature controller to control the temperat

Contact Now

Automatic rutting tester

The instrument is used for high-temperature rutting resistance determination of asphalt mixture, can also be used for auxiliary determination of aspha

Contact Now

82/85 Asphalt thin-film oven

It is applicable to determine the semi-solid bitumen performance changing situation in the heating and air circumstances. The test methods are close t

Contact Now

HB-10/20 Bituminous mixtures mixer

The machine is designed and produced according to the provisions of the Ministry standard JTJ 052-2000 "Standard test methods of bitumen and bitum

Contact Now

MDJ-3 Marshall electric compactor

The instrument is a special equipment for forming test sample in bituminous mixture test, and suitable for bituminous mixture Marshall test standard.

Contact Now

LWD-3 Marshall Stability Tester

The instrument is used to test the ability of thermal stability and plastic deformation resistance for bituminous mixture --- stability and flow value

Contact Now

LWD-4/5 Marshall Stability Tester

The instrument is used to test the ability of thermal stability and plastic deformation resistance for bituminous mixture --- stability and flow value

Contact Now

XY-1 Gyratory compactor

It is mainly used to determine the mechanical and volumetric properties for hot-mix bituminous mixture. It is one critical equipment for bituminous mi

Contact Now

XY-2 Gyratory compactor

Specifications: Compaction pressure: 600kpa Rotation angle: 1.25 Rotation speed: 30rpm. Specimen diameter: 15cm (10cmoptional) Built-in sample ejecti

Contact Now

Hydraulic rutting sample molding machine

The instrument is used for high-temperature rutting resistance determination of asphalt mixture, can also be used for auxiliary determination of aspha

Contact Now

SYD-0621 Standard Bituminous materials viscometer

The apparatus is used for testing the viscosity of liquid asphalt, coal tar, emulsified asphalt when flows. With Dual microcomputer control, it is in

Contact Now

SYD-2806E Automatic Bitumen softening point tester

The apparatus is designed according to ASTMD36, T0606-2000 Standard test method for softening point of bitumen(ring and ball apparatus) , used for det

Contact Now

DLC-3 bituminous mixtures centrifugal extracter

The instrument is used by road traffic engineering departments and related scientific research and education institutions to test the bituminous mixtu

Contact Now

GSY-V Automatic bituminous mixture extracter

The instrument is one automatic autolysis system to determine the asphalt ocntent in the bituminous mixture s, it has the vibration screening, centrif

Contact Now

LS-1 Bitumen breaking point tester

Bituminous material will change from the viscous - plastic state into the elastic- breakable state following the decreasing temperature , thus the sur

Contact Now

SYD-3536 Petroleum products flash and fire point tester

Determination of flash and fire points (Cleveland open cup method) to determine in addition to, and opening flash point below 79 (with the legal d

Contact Now

Asphalt moisture content tester

This machine is suitable for determine the moisture content of petroleum asphalt, coal tar or asphalt emulsion, and amount of water containing in vari

Contact Now

CF-B Digital display thermostatic water bath

The instrument is used for heating and constant temperature to asphalt concrete specimens .It can provide standard constant temperature specimen to as

Contact Now

WSY-10 Asphalts wax content tester

The instrument is designed and produced according to SH/T0425-92 "test method for wax content of asphalt" standard. This instrument complies w

Contact Now

SZR-3 Computer determining bituminous material penetration tester

It meets the "Standard test methods of bitumen and bituminous mixtures for highway engineering", the instrument has automatic time control, au

Contact Now

LZ-35 Computer determining bituminous material penetration tester

It meets the "Standard test methods of bitumen and bituminous mixtures for highway engineering" standard, the instrument has automatic time co

Contact Now

LZW-5 Automatic Digital asphalt viscometer

It is applicable to test the viscosity of low-viscous consistency asphalt, liquid asphalt, soft coal tar and others. At the specified temperature, ful

Contact Now

SD-2 sand equivalent tester

It is used for testing the Cohesive soil and impurities content in the fine aggregate which the maximum aggregate size is not more than 4.75mm, suitab

Contact Now

LXBP-2 Eight consecutive wheel highway flatness gauge

LXBP-2 Eight consecutive wheel highway flatness gauge Technical parameters: Minimum turning diameter: 0.5m Detection speed: 12Km/h Non-detection

Contact Now

LM-1 Theoretical maximum bituminous mixtures specific gravity tester

It adopts vacuum method to test the theoretical maximum specific gravity of bituminous mixtures for the bituminous mixtures ratio design, road conditi

Contact Now

SYD-265E Asphalts kinematic viscosity tester

SYD-265E Asphalts kinematic viscosity tester Technical parameters: Test temperature: 0 ~ 1350 , any setting Control accuracy: 0.1 Heating power:

Contact Now