Lafe Chemical Industrial Group Co.,Ltd

High transparent containers, transparent household products, food containers, large transparent collection box, disposable needle

Grade : Other medical, food transparent, high flow, chemical resistance Noted : High flow, high transparent, resistance to chemicals

LDPE / LLDPE: Mainly used for thin-film products, followed by pipe, injection molding products, wire wrapped layer

LDPE / LLDPE: Mainly used for thin-film products, followed by pipe, injection molding products, wire wrapped layer

LDPE / LLDPE: Mainly used for thin-film products, followed by pipe, injection molding products, wire wrapped layer

Polyvinyl Chloride Resin SG3 SG5 SG8 Quality standard GB5761-93 Inspection item Guaranteed Value K value 72 - 71 68 - 66 59 - 55 Viscosity number 135

LDPE / LLDPE: Mainly used for thin-film products, followed by pipe, injection molding products, wire wrapped layer

General household products, large molded products , industrial parts, disposable products , totes , etc. Characteristics: high stiffness, resistance

General household products, large molded products , industrial parts, disposable products , totes , etc. Characteristics: high stiffness, resistance

Specification Test Item Melt Flow Rate(G/10min) 0.35 Density(G/Cm3 0.96 Power Ash 0.01 Tensile Strength Mpa 23 Elongation At Break% 800 Izo

PP Granules for woven bag Project data unit MFI 10 g/10min Tensile strength 23.4 g/ccm3 Elongation at break 630 % Notched impact 5.5 KJ/m2 Apearance

1.Specification: Type SG5 Viscosity, ml/g(orKvalue) 118-107(68-66)1100-1000 NumberofImpurityParticalmax. 30 VolatilesContent%, &nbs...

1.Specification: Type SG5 Viscosity, ml/g(orKvalue) 118-107(68-66)1100-1000 NumberofImpurityParticalmax. 30 VolatilesContent%, &nbs...

Project data unit MFI 10 g/10min Tensile strength 23.4 g/ccm3 Elongation at break 630 % Notched impact 5.5 KJ/m2 Apearance granule Color white

ABS Heat resistance (HR) 2010-HR95 0 HB High strength, Heat resistance 95, 105, 115, 2010-HR105 0 HB 2010-HR115 0 HB FR 2010AF 0 V0, 5VA Flame retarda

Grade Item No Film Grade Injection-Molding Grade Coating Grade Blown-Molding Grade Artificial Flower Grade Wire & Cable Grade Packing 25 Or 50 Kg / Po

Specifications: Parameter Unit Specification Intrinsic Viscosity dL/g 0.800.02 Crystallinity % 60 Content of COOH Mol/t 26 Content of acetaldehyde pp

Specifications: Parameter Unit Specification Intrinsic Viscosity dL/g 0.800.02 Crystallinity % 60 Content of COOH Mol/t 26 Content of acetaldehyde pp

Specifications: Parameter Unit Specification Intrinsic Viscosity dL/g 0.800.02 Crystallinity % 60 Content of COOH Mol/t 26 Content of acetaldehyde pp

Specifications +ROHS, SGS, FDA, COA +Add ratio:10%~35% +Non-toxic, environmental protection +Good dispersion and stability +Transparent MB Transparent

Specifications +ROHS, SGS, FDA, COA +Add ratio:10%~35% +Non-toxic, environmental protection +Good dispersion and stability +Transparent MB Transparent

Specifications +ROHS, SGS, FDA, COA +Add ratio:10%~35% +Non-toxic, environmental protection +Good dispersion and stability +Transparent MB Transparent

Specifications +ROHS, SGS, FDA, COA +Add ratio:10%~35% +Non-toxic, environmental protection +Good dispersion and stability +Transparent MB Transparent

Properties Test conditions Typical Value Unit MFR 8.02.5 g/10min Haze 2.0 % Gloss 86 % Tensile strength at yield 25.0 MPa Flexural modulus &g...

Properties Test conditions Typical Value Unit MFR 8.02.5 g/10min Haze 2.0 % Gloss 86 % Tensile strength at yield 25.0 MPa Flexural modulus &g...

Properties Test conditions Typical Value Unit MFR 8.02.5 g/10min Haze 2.0 % Gloss 86 % Tensile strength at yield 25.0 MPa Flexural modulus &g...

Properties Test conditions Typical Value Unit MFR 8.02.5 g/10min Haze 2.0 % Gloss 86 % Tensile strength at yield 25.0 MPa Flexural modulus &g...

detailspecificationforblowinggrade: MeltFlowRate(190oC, 2.16kg) 0.40 g/10min Density ...

detailspecificationforblowinggrade: MeltFlowRate(190oC, 2.16kg) 0.40 g/10min Density ...

Technicalspecifications(HDPE) FilmGrade Item Testcondition Value Unit Density 0.944-0.955 g/cm3 MFR 190C/2.16kg 0.03-0.07 g/10min Tensilestrengthat&

LDPE/LDPE granules/Low Density Polyethylene Tests Value Unit MeltFlowRate(MFR) 15 g/10min Density 0.922 g/cm3 TensileYieldStrength 7 Mpa Elong...

LDPE/LDPE granules/Low Density Polyethylene Tests Value Unit MeltFlowRate(MFR) 15 g/10min Density 0.922 g/cm3 TensileYieldStrength 7 Mpa Elong...

LDPE/LDPE granules/Low Density Polyethylene Tests Value Unit MeltFlowRate(MFR) 15 g/10min Density 0.922 g/cm3 TensileYieldStrength 7 Mpa Elong...

Technicalspecifications(HDPE) FilmGrade Item Testcondition Value Unit Density 0.944-0.955 g/cm3 MFR 190C/2.16kg 0.03-0.07 g/10min Tensilestrengthat&

1, LLDPE film grade Tests Value Unit Melt Flow Rate (MFR) 2.00.4 g/10min Density 9202 Kg/cm3 Tensile Strengthat Yield 8 Mpa Tensile Strengthat Break

1, LLDPE film grade Tests Value Unit Melt Flow Rate (MFR) 2.00.4 g/10min Density 9202 Kg/cm3 Tensile Strengthat Yield 8 Mpa Tensile Strengthat Break

1, LLDPE film grade Tests Value Unit Melt Flow Rate (MFR) 2.00.4 g/10min Density 9202 Kg/cm3 Tensile Strengthat Yield 8 Mpa Tensile Strengthat Break

PP for non-woven fabric Project data unit MFI 23.8 g/10min Tensile strength 17.54 MPa Elongation at break 540 % Appearance ------ granule Color ------

Specification Property PP-72 blue PP-73 red Appearance Granule Granule MFR 15 16 Elongation at Break >50 >50 Tensile Strenght 19mpa 20mpa Others Colo

PP Granules Main application filed: Transluscent Household products / Consumer goods Transluscent Parts Good cost of impact Distance Housewares Excell