Automatic Banner Welding Machine
 

 1.Application:

The automatic welding machine is designed to weld plastic materials. The automatic welding machine can weld advertising inkjet fabric, inkjet cloth, light box cloth, thick PVC cloth, mesh cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted. It is small, light and easy to operate. It is equipped with temperature feedback sensor. The sensor can always monitoring the temperature of the outlet to keep a constant temperature. It uses advanced PID control technology, and adjust the power to make the temperature more constant automatically.the fluctuation is within 1 degrees. This function can make the welding result stronger. It also can avoid leakage. This machine is more suited to fast welding of large banners

Please pay attention:In order to keep heat element,we add Automatic Dormancy function,it means if not using welder over *0 minutes,machine would be enter dormancy state.if want it reback to work,just press the Reset or put the operation handle to right is ok,but it needs 1 minute to raise the temperature,so we need to wait

      Plugboard  must be grounded wire,when using welding machine    

 You mustnt turn off the machine until the welding machine will completely cool down in a few minutes. Then pull out the plug.
Preparation before using the machine
1. You should adjust the temperature and speed according to the thickness of banners.
2. Fix the cloth on the smooth ground to make sure the best result.
Maintain
1. Clean the nozzle with copper brush.
2. Clean the air inlet with soft bristle brush.
3. Check the power cord and plugs to avoid any mechanical damage.


Caution:
Before the shutdown , worker must take the yellow heating switch (yellow knob) counter-clock wise to turn to the "click" position , till the actual temperature drop below *0 ℃, and then turn off the main power supply, or it will do damage to the welder.

Be sure read  the specification and CD carefully before used welder.

Dormancy:
When the machine is in dormant state, you can press the Reset or operate the machine like before welding,the machine will be start working.

Press the Reset to restore normally operation if the display show white screen.