Product Description

The sawdust pellet machines, wood chaff pellet machines, and biofuel pellet machines produced by our company have compact structures, are easy to operate, are stable in movement, and can work continuously. It has the characteristics of unique design, reasonable structure, low consumption and high efficiency, strong and wear-resistant, and has reached the international leading level. The host electronic control system adopts the international standard configuration of star-delta starting, and the operation is extremely stable.

Part Number	Power (three-phase)	capacity kg/h	Net weight/kg	Package Size L *Width*H/mm
150	Single ph four-stage high horsepower 4 kW	80-150	81	850×350×570
210	Three ph four-stage 7.5kw	300-450	165	990×430×710
260	Three ph four-stage 11/15kw	600-800	290	1300×450×1100
300	Three ph four-stage 22kw	1000-1200	397	1360×570×1150
400	Three ph four-stage 30kw	1500-1800	680	1550×620×1250

1. Be familiar with the working principle of the machine and the structure and function of each part.
2. Operators should wear tight-fitting work clothes, do not open cuffs, do not wear gloves, wear protective caps and dust masks, and must concentrate during operations.
3. Before use, please fill the cycloidal pinwheel reducer installed on the auger with 46# engine oil according to the label.
4. Please completely remove the rubber ring on the ventilation cap of the machine reducer as shown in the figure when using it.
5. Prepare the grinding material: 10 kilograms of raw materials + 3 kilograms of waste engine oil + 2 kilograms of fine sand and mix thoroughly.
6. Find a professional electrician to correctly connect the power supply according to the code on the electric control box.
7. After the power connection is successful, first turn on the circulating oil pump switch. After the oil circulates normally, turn on the machine granulating switch. Don't rush to feed at this time. Wait until you hear a "bang" and the machine starts successfully for the second time and then feed and mix at a constant speed. The machine grinds the abrasive material repeatedly for 40 minutes until the inner hole of the template is smooth before normal production can begin.
8. Before each production is completed, please use oil to throw out the remaining particles in the hole to prevent the hole from being blocked.