Product Description

AAC plant *-cutting machine have two type one is airturn , the other is groundturn cutting machine , the capacity is same , difference type with difference characteristics . Aerated Autoclaved Concrete block machine line cutting machine’s working principle: After turn the body on the over turning platform with the Base Plate, move towards the cutter until the small sliding table. After *0 degrees turn over, move the body from the small sliding table to the cutting position, cut the body’ four sides horizontally, then lengthwise cutting.After cutting , move the body from the small sliding table to the over turning platform, turn the body on the counter-turnplate by *0 degrees with reversing direction. The usage of the cutter: To cut the body that after calmly palced and demoulded. The advantages of the cutter: 1. Can realize the horizontal and vertical cutting by one time. 2. Cut the body with six sides , and the precision can achieve GB/T****9－***7. 3. With this cutter , there is no need of the second time hoisting, so can reduce the damage of th body because of multiple hoisting. 4. Move the skin by six sides, the waste material dose not enter the autoclave, can be recycled. 5. The structure is compact , and the process of cutting , it is easy simple to operate , can achieve automatically. 6. The body can not be blocked together 7. The transverse cutting uses the transmission of lead screw, can solve the question of hydraulic transmission not the synchronized 8. The mechanical system does not have the spacing and the interlock, may prevent the equipment accident which improper operation. The cutting machine is the most important part of Aerated Autoclaved Concrete block machine ***** production is more than *0, **0m3. T