HIGH PRESSURE GRINDING ROLLS

Product Description

• Computer setting is simple to operate, multi-functional product application, with three production modes of shaping, coarse sand and fine sand.
• The product has good particle size, coarse, medium and fine materials, and produces the best FM Value (between 2.8~3.2).
• The machine output is large, more than 130-150 tons per hour.
• Less return product, less powder, low churn rate, higher production efficiency.
• The machine discharge gap is automatically controlled, which is constantly maintained and the output is stable.
• Longer roller life and low production cost (roller can be used for about 2,500 hours, consumable wear cost less than 0.45 USD per ton).
• Low speed, low noise, high efficiency and energy saving (motor 35 revolutions per minute; The cost of the electricity per ton is less than 0.3 USD).
• Each of the two rollers has 1700 tungsten carbide steel columns, high-density steel columns are arranged with soft and hard walls (rollers and tungsten carbide steel columns are staggered), and the best particle size of sand are produced by multi-point crushing.
• MG900 unique design of triangle friction plates between two rollers increase the crushing space between the rollers, the crushed objects will not splash around to fall to both ends, to achieve the multi-layer crushing (stones crush stones), so that the crushing efficiency of the roller can maintain a certain amount.
• MG900 fixed end roller, equipped with the replaceable roller side flange (tungsten carbide material rolling wings), so that the materials can evenly be crushed on the surface of the roller to bring in the averaged crushing of the roller, much better than the uneven pressure of other brands of rollers.
• MG900 uses a combination of force arm and hydraulic cylinder to maintain a constant crushing chamber to make its finished particle size consistently.