Looks like you are not TradeKey.com's Member yet. Signup now to connect with over 9 Million Importers & Exporters globally.
Join Now, its Free |
Book call on your favorite time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

MILSTEEL

5000 Trust Points

Gaylord Commercial Building,114-118 Lockhart Rd Wan Chai,Hong Kong,Hong Kong

View Phone Number

Member Badge
1st Year
MILSTEEL

Hot worked tool steel H13

Hong Kong

-

( Negotiable ) Get Latest Price

china

-

5 Ton

As per requirement

30-35 days Hot forged, Spheroidizing annealed with

-

-

-

Contact Now

Product Specification

Steel Grade : - Standard : - Dimensions : - Brand Name : - Technique : - Application : - Alloy Or Not : - Special Use : - Type : -

Product Description

Related specifications

Europe EN 1.2344

Germany DIN X40CrMoV5-1

Great Britain BS 4659 BH13

USA AISI H13A

Japan JIS-SKD61

GB/China 4Cr5MoSiV1

Chemical Analysis

C Mn Si Cr Mo V P S

0.35-0.40 0.3-0.5 0.8-1.0 4.8-5.0 1.1-1.3 0.8-1.0 ≤0.015 ≤0.010

Applications

-General purpose hot worked tool steel used in aluminium extrusion dies, backers and

bolsters, stems and mandrels, die casting dies and forging inserts.

Die Casting

Dies

Dummy Blocks Extrusion Dies Hot

Forging Dies Heading Dies Hot Heavy Shear Blades

Inserts Mandrels Piercing Tools Hot

Plastic Mold

Dies

Punches Hot Swaging Dies Hot

Main feature: High tenacity, plasticity, thermostability and abrasive resistance.

Hardening

Hardening should be done in controlled atmosphere, vacuum or fluidized bed furnace.

Preheat gradually to 450/800 ℃ then raise to 1000/1030℃, holding for sufficient time to

attain uniformity throughout the tool, air cooling.

Tempering: Tempering should be carried out immediately after air quenching. Heat to 550/650℃,

holding for one to three hours. Tools benefit from multi-tempering and a minimum of two

tempers is recommended. Care should be taken to ensure tools cooling to room

temperature in between tempers. Also suitable for both bath and gas nitriding.

Conventional Smelt: EF+LF+VD+ESR

Available size

Type

Thickness

mm

Width/Diameter

mm

Length

mm

Block 100-500 400-1200 2000-3000

Round

bar

60-800 2000-6000

Delivery Condition

Hot forged, Spheroidizing annealed with hardness HB210-230

atment

Temperature

Range

Cooling/Quenching Notes

Forging 2000-2100° F Slow Do not forge below 1650° F. Anneal after forging.

Annealing 1560-1625° F

Cool slowly at a

rate of 35° F per

hour to a 1110° F.

Protect against surface decarburization using

controlled atmosphere or by pack-annealing. Hold at

temperature for 2 hours.

Stress

Relieving

1110-1300° F

Cool slowly in

furnace to 930° F.

Then in air.

Preheating 1400-1500° F

Preheat time in furnace is ¾ Hr. per inch of thickness.

Heating up to temperature as slow as possible.

Hardening 1830-1900° F

To minimize

distortion, air cool.

For maximum

hardness

diameters greater

than 6􀳦 should be

quenched in oil.

Soak time is 30 minutes per inch of thickness.

Minimum of 1 hour. Allow to cool to 125-150° F before

tempering

Tempering In air.

Complete equalization of temperature throughout the

tools is essential for good results. Double temper.

Recommended temperature is 1000-1200° F. Hot worked tool steel H13

Contact Us

Contact Person :Ms. Hilary

Company:MILSTEEL

Address:Gaylord Commercial Building, 114-118 Lockhart Rd Wan Chai, Hong Kong, Hong Kong,518111

To,

Ms. Hilary < MILSTEEL >
I want to know:

More Products From MILSTEEL

M2 High Speed Steel M2 High Speed Steel
Hot work tool steel H13 round bar Hot work tool steel H13
Plastic mould steel P20 1.2311 Plastic mould steel P20
Alloy Structure Steel 42CrMo Alloy Structure Steel
Hot work steel 5CrNiMo Hot work steel 5CrNiMo
Plastic Mould Steel 1.2738 Block Plastic Mould Steel 1.2738
Rust-proof Mirror Steel -1.2083 Rust-proof Mirror Steel
Plastic Mould Steel -1.2316 Plastic Mould Steel -1.2316
Cold work steel D2 1.2379 Cold work steel D2 1.2379