Product Description

This is the Electric Powered, 2.4GHz Radio Controlled, 1/8 Scale, Ready to Run WR8 Flux Ken Block Ford Fiesta Rally Car from HPI.

FEATURES: Chassis: 0.*2" (3mm) thick silver anodized aluminum with composite front and rear braces and plastic side dirt guards Drive: Four wheel shaft Radio: HPI TF**0 2.4GHz *-channel with steering and throttle end point adjustment, trim and dual rates, fail safe and SF*0W waterproof analog steering servo Motor: Flux Vektor ***0kV brushless ESC: Flux Vapor Pro with reverse, cooling fan and fully programmable with the #*****3 Castle Link USB Programmer, HPIC***3 (not included) Differentials: Three, adjustable bevel gear type, oil filled Shocks: Oil-filled, composite body with rear mud guards Suspension: Front and rear sway bars, composite lower suspension arms and solid upper links Tires: Scale Michelin Tarmac Rally, 1.4" (*5mm) wide, 3.1" (*0mm) diameter Wheels: Tarmac Spec plastic 1.4" (*5mm) wide, 2.2" (*6mm) diameter, *2mm hex size Ball Bearings: Full set Pinion Gear: *5 tooth Spur Gear: *6 tooth composite Body: Trimmed and painted white with all sponsor decals applied Bumper: Front foam with plastic raised skidplate that allows car to slide over objects in the road Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-Adjustable camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Warranty: *-year limited through manufacturer, valid only in USA, Canada and South America

INCLUDES: HPI RTR WR8 Flux Ken Block Ford Fiesta Rally Car with 2.4GHz Radio System, ESC, Brushless Motor, Body, 4 AA cells for Transmitter and Instruction Manual

REQUIRES: LiPo Battery: **3S LiPo with at least *5C rating and ***0mAh and Deans Female plug Battery Charger: Compatible with selected battery LiPo Charging Bag Building and track equipment

SPECS: Vehicle- Length: *9.1" (**5mm) Width: 8.9" (**7mm) Height: 6.8" (**2mm) Wheelbase: *1.8" (**0mm) Body- Length: *8.9" (**0mm) Width: 8" (**3mm) behind front wheels, narrowest point 9.1" (**2mm) at rear wheels, widest point Height: 6" (**3mm)

COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty Bearing Set 4 5x*0mm Front Hubs 2 DTXC***5 4 5x8mm Rear Hubs 2 DTXC***3 6 *0x*5mm Differentials 3 DTXC***5 2 5x*0mm Front Diff Case 1 DTXC***5 2 5x*0mm Rear Diff Case 1 DTXC***5