Product Description

Machine description:
Nancy

Summarize of Nail Production Line

Nail Making Machine Production Line includes a pointing machine, continuous type drawing machine, nail-making machine, and polishing machine. For the raw materials, there are new materials and scrap steel. The difference is the drawing machine. If using new materials, you can use a horizontal drawing machine or a continuous drawing machine in the drawing process; and if using scrap steel, you need to use a roller-type wire drawing machine.


 

Work Flow

Pointing machine

1. be composed of rolls and reduction gears.

2. simple structure and easy operation.

3. widely used for metal wire processing, especially for all kinds of metal wire rolling before drawing.
 

Pointing Machine working procedure

1. Check whether the material bracket is stable before work, whether the machine tool switch is effective, and whether the gear guard is firm.

2. Before starting the machine, you should put the tools and sundries in the workplace.

3. When adjusting the roll gap, the gap pressure should not be too large to prevent the material from being crushed. When rolling the tip, press it gradually.

4. When feeding the rolling tip, the material rod must be gripped to prevent the bar material from sliding or lifting. For processing materials with a diameter of 18 mm or more, it is necessary to work together and pay attention to coordination and cooperation.

5. The tip of the material can not be touched by hand to prevent burns.

6. The position of the rack should be appropriate and the passage should not be blocked.

7. The discharged waste and oddments must be placed in the designated position.

8. Unrelated personnel are not allowed to approach the materials and equipment being run.