Polyaluminium Chloride *0%
PAC for industry water
treatment
1. Product introduction of Polyaluminium Chloride
This product is a kind of inorganic polymer flocculant. Mainly
through compression double, adsorption electricity neutralization,
adsorption Bridges, sediment trap etc mechanism function, make
edema subtle aerosols and colloidal ions off firm, gathered,
flocculation, coagulation, precipitation to purify the treatment
effect.
1).It is widely used in drinking water ,industrial waste water and
sewage disposal areas;
2).PH:3.**5.0,water insolube:<1.0.
2.Specifications of Polyaluminium Chloride
Polyaluminium chloride
1.Al2O3:Min *8%**0%
2.Basicity: *0% ~ *0%
3.Water insoluble%:0.**1.0
4.PH:3.**5.0
3. Product Advantages of Polyaluminium Chloride
1). Flocculation ability, high adsorption activity, floc formation
and deposition of fast
2). Without alkali and other additives, PH broad in scope, ease of
use; for low-temperature, low turbidity, low alkalinity of the raw
water is also good flocculation
3). In order to significantly reduce the stirring, mixing,
precipitation, time, and to flocculation, sedimentation tanks and
other small
4). In addition to iron, manganese, and can be obtained with low
conductivity water
5). Equipment is simple, use easy to operate, less corrosion and
better working conditions, low processing costs.
4. package and storage of Polyaluminium Chloride
*5 kg packed in two-layer bag with the interor in plastic and the
exterior the woven or as your request .
5. Warmth remind of Polyaluminium Chloride
the product shall be sealed and stored in the dry and ventilated
place to prevent it from rain,high temperature and strong sunlight
.The shelf life of product is *2 months.
6.Usage of Polyaluminium Chloride
put the solid PAC into the water (common temperate) as the
proportion of 1:3 with stirring it. After *0 minutes,
when the solution is over, add ****0 times water to dilute it, and
then put into the waste water.
Generally speaking, the dosage is 1/*****0 of the waste water,
which means to put *5kg solid PAC in ***0 ton water.
The use of accurate, but according to the water quality in the
turbidity and different content by the test to find out the best
drug dosage