Product Description

Product Description
Application Of Badam Cutting Machine The badam cutting machine consists of three sections of feeding, chopping and classification which vibration feeding section can enable the peanuts to evenly fall into the container where the peanuts are being evenly chopped by rolling knives, in the classification section sieves of different sizes are installed which the peanuts into different sizes. By changing working speed of feeding conveyor to adjust the size of finished peanut particle.

Introduction:
This machine is mainly suitable for chopping peanut, cashew nuts, walnut, macadamia, and other nuts. It consists of three parts, that is, vibration feeding, chopping and grading. Vibration feeding can prinkle the peanuts evenly on the digging hopper, which is conducive to the uniform cutting of the hob. The grading part uses spiral drums with screens of different specifications to meet the required specifications.

Features:
1.Automatic and easy to operate, client just need to fill raw material into the hopper and then will get peanut parcel as you like;
2.Size of peanut parcel is easy to control and change. With adjust the speed of conveyor, cutting size of the peanut will be changed.
3.Equipped with vibration screen, can grade the chopped granules into different levels. And the size of the mesh screen is custom-made.
4.Chopped evenly, with little powder, no oil squeezed out.
5.High efficiency and stable quality. Spare parts of machine is not easy damaged. 6.Low noise, cutting evenly, with no oil squeezed out.


1.What is the machine material? The material contact part is 201 stainless steel, the main carbon steel, material contact and outsourcing can be changed to 304. 2. Can the equipment voltage be replaced? The device is powered by three-phase power and can be changed to single-phase power. The voltage and frequency can be changed as needed. 3.What is the structure and material of the tool holder? Each device is arranged with 10 cutters side by side, and is cut up and down and shredded. The blade size is 54cm*6cm*3mm and the material is 4Cr13. 4.How does the chopper machine adjust the particle size? The size control of the particles is achieved by adjusting the handles on both sides of the roll and changing the gap to the rolls. 5.What are the requirements for materials? When the moisture content of the material is controlled at 4%-5%, the chopping effect is best, and the powder content is 5%-10%. 6.The material particle size is different, is the machine output certain? When the particle size is 2-3 mm, the output is 100-150 kg. If the particle size is more than 5 mm, the output is 200-300 kg.


All of our products comply with international quality standards and are greatly appreciated in a variety of markets around the world. Covering an area of 1,500 square meters, we now have over 50 employees and an annual sales figure that exceeds USD 1000,000. As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching more than 40 countries in Europe, North/South America, Middle east, Asia etc. We continue to strive to meet the Customer's expectations in terms of quality products, timely deliveries, competitive pricing and reliable after-sales service.