Product Description

Type of machine:    Rapier weaving machine for terry cloth.
Loop formation:    Mobile warp-fabric system achieved through the synchronous motion of the pressing roller and backrest.
Nominal widths:    **************************************0mm.
Width reduction:    **0mm standard,***0mm on request.
Performance:       Up to **0 picks per minute.
                Up to more than ***0 m/min of weft inserted.
Fabrics produced:   All types of terry cloth.
Yarn woven:       Single or twisted warp yarns.
                 Discontinuous weft yarn:Nm 2 to Nm **0 and continuous weft yarns:dtex ***0to dtex *0.
Shed geometry:     Reduced dimensions,symmetrical .
Version:           For single beam versions:
                 ***-mm ground beam and ****-mm loop beam
                 ****-mm ground beam and ****-mm loop beam.
                 Quick beam release (both lower and upper).
Number of colours:  *****2 colours in any order.
Weft feed:         Electronic speparate-coil weft feeder.
Sley:             Driven by positive coupled cam units.
Weft density:     Standard:from 4 to *4 wefts/cm.From 1 to **0 weft/cm on request.
                 Different programmed weft densities in the patterns.
Warp let-offs:      Motorised positive let-offs with electronic control, timed with the fabric regulator.
Fabric regulator:   Motorised positive fabric regulatorwith electronic control , timed with the warp let-offs.
Shed formation:    Electronic rotary dobbies (maximum *0 frames).   
                 Electronic Jacquard with cardan drive.
Pick-finding:    Two-purpose motorised device with electronic control,can be programmed at will and also used for slow motion.
Selvedges:        Leno device binding with 2 ends .False selvedge and binding ends controlled by a separate device.
                 Tucked selvedge devices.
Weft control:      High-sensitivity piezo-electric detector with double weft control.
Warp control:      Separate electric warp stop motions with 4 (2*2) or 8 (4*4) row ,ground and loop warp.
Fabric take-up:     On fast release roller,up to **0 mm in diameter.
                 External take-up roller fittings on request.
Lubrication:       Pressure lubrication for ribbon drive ,sley cam boxes
and loop formation device.
Main drives:       Rated three-phrase 6.5 kw motor.
                 Electro-magnetic brake-clutch unit.
Machine control:  Via on-board computer based computer on the CAN-BUS system that drives and controls all the main textile and mechanical functions.
                 Programming,management and filling of patterns.
                 Management of production and statistics.
                 Programming of down times and types of automatic pick finding for every weaving requirement.
                 Complete compatibility with data acquisiton systems and two-way communication.
Options:          Electronic VRT device for varying the weft ratio.