Product Description

Thread end ball valve is a kind of common ball valve in the industry. It is used to cut off or change the  direction of fluid .Specially provided for the condition with middle-flow pressure.This ball valve is applicable for water,oil,steam and other corrosive mediums.
 
Benefits
1.Manufactured with full bore or necking structure, the one-piece floating ball valve, two-piece floating ball valve and three-piece floating ball valve are all available from us.
2.The floating structure will make the ball pressing on the sealing surface due to the displacement caused by the pressure from the medium. So our floating ball valve has good sealing performance .
3.Horizontal installation ,Thread end make the installation become easier.
4.Little flow resistance with simple ball valve structure.
5.Small volume and light weight .
6.Easy to repair as the replaceable sealing rings.
7.Soft sealing material makes the ball valve with tight sealing .
8.When the valve fully open and close ,sealing surface between valve ball and seat avoid contacting with the fluid ,erosion will not occur when the fluid passing.
 
 
Technical specification
Size：1/4~2
Pressure：Class **0~Class **0
Structure Type：2 pcs type
Material of Valve Body：WCB（A**5), CF8(**4), CF8M(**6), CF3(**4L), CF3M(**6L)etc.
Sealing material ：Rubber,PTFE,etc.                      
Connection Type：Thread end  
Drive Mode:lever operate,
Design  standard：ASME B*6.*4, ASME B*6.*0.
 
Application industry
Chemical industry
Water industry
Power industry