Product Description

Waterproof RGB LED Strip

The RGB Or Single Color LED Strip Paramater:

1. ***8SMD LED Tape Light, *0LED/M          
Item No. Color Light Source Q'ty of LED Tape Size Cutting Unit Voltage Power 1 CS**1W*0CW******0V White SMD***8 *0LED / M 7.5X*1 mm **0cm/Cu
AC******0V 4.4W/M WarmWhite Red Green Blue Yellow

LEDStrip Specifications:
1. LED TYPE: ***0SMD
2. LED QTY: *0leds/m  *0leds/m
3. Chip Brand: Epistar Taiwan(*5lm/LED)
4. Voltage: DC*2V/*4V
5. Power: 7.2W/m  *4.4W/m
6. Dimension:*0****0mm
7. Color:red/yellow/blue/green/white/pink/RGB
8. Ip grade:non-waterproof/IP*5(epoxy resin)/IP*7(silicone)
9. Lifespan:>****0H
*0. Warrenty:2years(within 2years,our company will offer corresponding goods to repair or replace,once we confirm the badness of products are caused by our quality)

The LED Strip Advantage:

Easy connection and installation 
1. long life span, standard warranty 2 years
2.6 Leds cutable, matched with easy connection accessories
3. No need the constant-current power feed
4. Low power consumption
5.Best choice for holiday season, show and exhibition 's decorating

 Attentions:
1.Effective power for switch power is only *5% of power’s label,so 
LED product’s load power shoul be at least more than *5% when user 
choose feeding power.
2. Make sure the right and stable anode and cathode when installing 
cables,and also attention to the driving voltage in case to damage
components and fire accident when circuit pass through voltage.
3.Forbidden to connect cables when power on,putting power in cool
place,so that it ensures appropriate working temperature.
4.Make sure strip’s grade of waterproof.To install suitable 
conditions in accordance with practical IP.
5.This product is allowed to connect only *0PCS(0.5M/PCS)in seires
 wound. 2V differential voltage for the beginning and the end.
6.This user manual is only applicable for our product.
7.If it is Crystal Glue,please don’t crook *0 degree,otherwise,
 it easly happens glue cracking.

 
The LED Strip Applications:

1. Construction decorative lighting
2. Advertisement signs
3. Car decorative lighting
4. Architectural decorative lighting
5. Archway lighting
6. Canopy lighting
7. Bridge edge lighting
8. Amusement park and theater cabin mood lighting

Quality Control: 
**0% of the lamps will be tested and keep lighting for *0hours , and part of them will be kept lighting for *4 hours, to test quality reliability. We will also test the lamps' temperature and other parameters after *4 hours' lighting.Then after they are cool, we again test **0% of the lamps to see if they still work well .