Wingfit stand garment steamer
Key Features
Now is the era of vertical ironing!
To iron well, you need three things:
1. Temperature /2. steam / 3. pressure
However, in the vertical state, it must be solved by tension, not
pressure.
The key is to create an omni-directional tension force on the
garment before ironing.
The wingfit hanger creates a tight tension on any size top and
fixes it, so the setting before ironing is perfect.
Advantages
1. Application of the best patented technology
· Equipped with a wing fit hanger that expands clothes in
all directions from the inside of the top
2. Simple and convenient operation
· You can adjust the size of the left/right width by holding
the wing by grafting the idea obtained from the operation of the
cutter knife.
· As with a cutter knife, there is a corrugation line on the
central support and when the plastic spring stops at the crease
line valley, the width of the wing is fixed.
3. Simple and stylish design
· Even when not in use, the cross-sections of the wings are
closely adhered to each other, resulting in excellent design
aesthetics.
4. Straight design for easy storage
· The rectangular design makes it possible to store it in a
narrow space due to its slim vertical width.
5. Increase ironing power with strong and rich steam
· Powerful steam generation with 1700W power
· 30g/min : Generates 30g of abundant steam per
minute
6. A 1.8L large-capacity water bottle can be used continuously for
more than 50 minutes
How to use
[Installation and operation]
1. Open the rocker and insert the support rod into the hole. When
you release your hand from the locker, the support rod and body are
locked.
2. Place the Wingfit hanger on top of the support rod and secure
it.
3. Move the support bar to adjust it to an appropriate height and
fix it.
4. Insert the steam pipe head into the main body steamer connector
and turn it to the right to secure.
5. Turn on the switch and wait for a while, then steam will start
to come out. Turn off the product after use. Unplug and store when
not in use.
[How to use the wing fit hanger]
1. Put the triangle coat hanger with the top hanging on the wing
fit hanger.
2. Grasp both wings of the wing fit hanger and spread them all the
way to both sides to create tension.
3. Stroking down the clothes on the wings on both sides to create
an omnidirectional tension.
4. When ironing on the arm, pull the arm sleeve with the wings
spread out to create tension before ironing.
Cautions
1. Do not use the product before reading the
instructions.
2. Watch out for hot condensed water from the steam vent before
operation.
3. Move the steam head in a vertical direction. When moving in the
transverse direction, steam is released from the spray
head.
4. Do not immerse or expose the product to water or other
liquids.
5. Operate with care and keep out of reach of children.
6. Do not pour hot water into the water tank. The water tank may be
deformed.
7. Pay attention to plugs, sockets and power sources. Do not pull
on the plug or forcefully remove it.
8. Do not put the plug in contact with the heating part, and drain
the water after the main body cools down before storing the
product.
9. When not in use for a long time, drain the remaining water and
unplug it.
10. If any part is damaged, refer it to a professional. Incorrect
maintenance may cause injury, fire and electric shock.
11. Do not touch the heat radiating area or the steam spray head.
Pour enough water to avoid injury.
12. Allow the body to cool sufficiently after use.
13. Unplug the product when not in use.
14. Do not forcefully pull the steam pipe during
operation.
15. If the power cord is damaged, have it replaced by an authorized
center.
16. Before turning on the power, pour water into the tank to dry it
and avoid burning the fabric.
17. This product is for indoor use only.
18. As a precautionary measure, this product is not suitable for
children or persons with disabilities.
19. This product is not suitable for persons with disabilities,
intellectual disabilities, or persons lacking experience or
knowledge in the absence of supervision or instruction by the
person responsible for safety.
20. Do not allow children to play with the product.
21. For your safety, if the power cord is damaged, it must be
replaced by the manufacturer, an authorized service center, or a
qualified technician.
22. Be careful when using the product as steam is
emitted.
23. Unplug the product when adding water or cleaning.
Specification
|
Product Name |
Wingfit stand garment steamer |
|
Model Name |
BE-1531 |
|
Rated voltage |
AC 110V |
|
Output power |
1,700W |
|
Wire length |
1.2M |
|
Continuous steam |
55min |
|
Preheating time |
25sec |
|
Product weight |
6kg |
|
Water tank capacity |
1.8L |
|
Origin |
wing hanger : kotea / steamer : china |
Company Overview
Hello. This is the representative of Bold Electronics Co., Ltd. Lee
Sang-hoon.
Let's hold'Fit' on clothes with'Wing' and iron it!
We are a company that manufactures and sells wing fit steam irons
that are equipped with a patented wing fit hanger that allows you
to iron with an extended garment when ironing vertically.
The wing fit stand type steam iron BE-1531 equipped with a wing fit
hanger is a wing fit hanger that can be ironed after forming an
omnidirectional tensile force, so ironing is easy and simple, and
the space between the wool is widened, so the steam penetrates
deeply and the ironing quality is also excellent.
