Jinan Iron and Steel Group Co., Ltd

R.M.301,BUILDING NO.2 OF XIANDAI YICHENG,NO.34 EAST JIEFANG ROAD,LIXIA DISTRICT,Jinan,Shandong,China

Free Member

50 sell offers

BISPALTE 80 BISPLATE 80-a low alloy.high strength plate with a yield stress approximately three times that of carbon steel and featuring low carbon ,

PPGI ProductionCapability BaseMaterial GI, GL/AZ, EG, CR Thickness 0.2-1.2mm Width 800-1600mm CoilID 508mm, 610mm SingleWeight Max8M.T MetallicCoating

BOILER TUBE Standard:American society of mechanical engineers ASME SA-106, ASME SA-192M, ASME SA-210M, ASME SA-213M, ASME SA-335M American Society for

stainlesssteelpipegrade201304316L310S321 spec spec spec spec spec spec spec 14*...

stainlesssteelpipegrade201304316L310S321 spec spec spec spec spec spec spec 14*...

HOT ROLLED STAINLESS STEEL COIL/ SHEET GRADE THICKNESS COIL WIDTH SHEET SPEC 316...

Camouflage PPGI: Base Material GI, GL/AZ, EG, CR Thickness 0.2-1.0mm Width 1250mm Coil ID 508mm, 610mm Single Weight Max 8 M.T Metallic Coating Z60-

Metal Roofing Tile Thickness 0.13mm-2.0mm, Thickness tolerance: 0.02mm Width 600mm-1250mm, Width tolerance:-0/+3mm Weight of each package 2mt to 4&n

COLD ROLLED STAINLESS STEEL COILS/ SHEET SERIES GARDE THICKNESS WIDTH OF COILS SHEET SPEC 316L 0.4-3.0 1000...

B/mm t/mm 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 6060 63.563.5

Size: 4" 4-1/2"5" 5-1/2" 7" Grade: J/K55, N80, L80, C90, C95, T95, P110 Type of end finish: STC, LTC, BC Length: R2 or R3 Standard

Prdouct name:Tubing Standard:API SPEC 5CT Uses:Tubing is used for extracting oil and gas from well. Spec: See picture

stainless steel coil 1. Standard: ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165, BS 1449, DIN17460, DIN 17441 2. Grade: 200series&300series&40

Base Metal Galvanized Steel Coil(GI), Prepainted Galvanized Steel Coil (PPGI), Al-Zn coated steel coil(GL, PPGL) Thickness 0.14-4.5mm Wi...

Hot rolled Stainless Steel clad Plate Plate:200, 400, Titanium metal series Covered Layer Thickness:0.5-5mm or as request Basic Layer Thickness:3.5-4

TUBE FOR CONVEYANCE FLUID Standard GB/TChina National Standard ASTM A 53MStandard of American Society for Testing & Material ASTM A 106MStandard o

TUBE FOR GEOLOGICAL DRILLING STANDARD: YB 235 Standard Of China Metallurgical Industry YB/T 5052 Standard Of China Metallurgical Industry Uses:For

PRODUCT NAME:TUBE FOR PERFORATING GUN; USAGE: USED FOR MANUFACTURE OF PERFORATING GUN BODY; SPEC: SEE ATTACHED PICTURE.

PRODUCT NAME:INSULATING TUBING(INSULATING PIPE) USAGE:FOR PRODUCING VISCOUS OIL DIMENSION:SEE ATTACHED PICTURE

Prepainted aluzinc steel coils generally refers to the product made by treating the surface of substrate GL and laying(by roller) and baking. MAIN

Asakindofnewbuildinganddecorationmeterial, printedcoatingsteelisakindoftopgradecolor...

Hot-rolled Equal-leg Angle Steel Spec:7575 6 7 8 9 10 ;8080 6 7 8 9 10 9090 6 7 8 9 10 12 ;100100 6 7

Hot Rolled Channel Steel Spec 6.3# 8# 10# 12# 14a# 14b# 16a# 16b# 18a# 18b# 20a# 20b# Size 5-13m, 10mm Steel type

STANDARDS AND TECHNICAL CONDITION :API SPEC 5D USAGE:FOR WELL DRILLING Size Nominal ma

Product name:API Drill Collar Spec 1.Size: 9-1/2', 8', 6-3/4', 4-3/4' 2.SPIRAL DRILL COLLAR, SLIP AND ELEVATOR RECESS IN ACCORDANCE

1.Spiral type on wear pads, with 18 degree taper tool joint. 2.Pin shoulder to box shoulder length 30ft 6in-31ft 6inches. 3.Armaco M or Arnco 300xt

1.Size:5-1/4' HEXAGONAL KELLY 2.Length:40ft over all, 37ft working 3.6-5/8'REG LH BOX TOP CONNECTION AND 5-1/2' FH RH PIN 4.7'OD*3-

LINE PIPE Standard: API SPEC 5L, ISO 3183, GB/T9711 Uses:For conveying gas, water and oil either in the oil or natural gas industries.

Standard:GB 18248 China National Standard Uses:For manufacturing gas cylinder Spec: See attached picture

Standard: YB/T 5035Standard of China Metallurgical Industry GB/T 8162China National Standard Uses:Used in automobile axle, axle capsule

SEAMLESS STEEL TUBES FOR HYDRAULIC PROP Standard :GB/T 17396China National Standard Uses:For manufacturing cylinder and piston of hydraulic props fo

BISPALTE 100 BISPALTE 100 a low alloy, high strength steel plate with very high yield strength(over three times that of carbon steel)and featuring lo

BISPALTE 360 BISPLATE 360 is a through hardened, abrasion resistant steel plate, offering high strength, excellent impact toughness and long life exp

BISPALTE 400 BISPLATE 400-a through hardened, abrasion resistant steel plate, offering long life expectancy in high impact abrasion application. A

BISPALTE 450 BISPLATE 450-a through hardened, abrasion resistant steel plate, offering long life expectancy in high impact abrasion application. A

BISPALTE 500 BISPLATE 500-a through hardened, abrasion resistant steel plate, offering long life expectancy in high impact abrasion application. A

BISPALTE 600 BISPLATE 600-a through hardened, abrasion resistant steel plate, offering long life expectancy in the more demanding sliding and gouging

Color Coated Sheet: It is made by taking hot galvanized sheet and zinc-iron alloy hot galvanized sheet as the substrate through surface pretreatment,

Color Coated Sheet: It is made by taking hot galvanized sheet and zinc-iron alloy hot galvanized sheet as the substrate through surface pretreatment,

Galvanized Sheet: Hot galvanized sheet and alloying galvanized sheet have excellent performance, ideal combination property including corrosion res

Book call on your favorite time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services