Description

Name: *0/**0/***0M Self-adapt fiber optic media converter Type: APT****4WS*4/*4OC Scale: *0/**0/***0M CWDM media converter APT****4WS*4/*4OC Gigabit self-adapt single fiber dual-direction Fiber Optic Media Converter Single-fiber dual-direction fiber optic media converter be used to Ethernet&#**9;s electricity signal transmit to photosignal&#**9;s photoeletricity signal&#**9;s transceiver. The feature is use one fiber to transmit and receive photosignal in-phase. Less than dual-fiber media converter for one fiber but can enhance one double transmit energy, economization optical fiber cable resource. APT****4WS*4/*4OC Singlemode single-fiber is *0/**0/***0M self-adapt single fiber dual-direction fiber optic media converter. It&#**9;s completeness according with IEEE**2. 3ab, IEEE**2. 3u, *0BaseT, **0BaseTX, ***0Base-TX, ***0Base-SX, ***0 Base-LX standard. APT****4WS*4/*4OC Singlemode single fiber is a single gigabit single fier media converter. Due to single fiber dual-direction media converter&#**9;s photosignal transmit wavelength and receive wavelength are differece, so must be use by pair. One TX and One RX be one pair, can&#**9;t use wrong, if not will can&#**9;t working normal. Singlemode single fiber&#**9;s transmit photosignal wavelength is ***0nm, receive photosignal wavelength is ***0nm; Single fiber dual-direction media converter have one RJ**5 interface and one SC single fiber interface, separate for twisted-pair and fiber to connecting. Single fiber media converter have 6 LED indicator: POWER, SPDFX***0, SPDTX***0, FX Link/Act, TX Link/Act, Fdx. Technical parameter 1. According with IEEE**2. 3ab/z, IEEE **2. 3u, IEEE **2. 3X, IEEE**2. 1Q, *0BASE-T, **0B ASE-TX, ***0BASE-TX, ***0Base-SX, ***0Base-LX standard. 2. Support TCP/IP, PPPOE, DHCP, ICMP, NAT protocol. 3. Flow control: Full-duplex adopt IEEE**2. 3X, half-duplex adopt Backpressure standard. 4. Electricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5. Port supply Auto-MDI/MDIX automatic reverse. 6. Support storage transmit mode, cashe capability is **6K. 7. Support electricity port&#**9;s ***0M mode or self-adapt mode&#**9;s switch. 8. Support state indicator, external power(output 5V~*0HZ 1A) 9. Interface: Electricity port: RJ**5 fiber: SC *0. Twisted-pair: Cat. 5 Cat. 6 *1. Singlemode fiber: 8/**5, 8. 3/**5, 9/**5uM *2. Working temperature: 0~*0degree *3. Storage temperature: **0~*0degree *4. Humidity: 5%~*0% *5. Size: **0mm***0mm**0mm(L*W*H) Specification Connect type: SC Fiber type: Singlemode Wavelength: ***0/***0nm Typical distance: *0KM Min TX PWR: *5. 0dBm Max TX PWR: 0. 0dBm Sensitivity: < **4dBm Link budget: *9. 0dBm Note 1. Optical port working mode is *0/**0/***0M Full Duplex, LAN port is Auto Negotiation. 2. Twisted-pair interface initialization basis to check couple equipment&#**9;s state for set self&#**9;s state. If can&#**9;t check out opponent state, that the state is uncertainty. 3. Strictly prohibit use unaided eye to look at the TX fiber transmit port when the media coneverter is electrify state. 4. Please put dustproof cover on fiber interface, when the fiber optic media converter is not used. 5. When the product connecting with other equipment(router, switch, HUB, NIC), the interconnection equipment&#**9;s optic interface&#**9;s speed and mode must be consistent(multimode and singlemode). (***0Base-SX/***0SX). Between Interconnection equipment&#**9;s LAN port&#**9;s speed should mismatch. (***0Base-TX/**0Base-TX/*0Base-T). Trademark: APTTEK Model: APT****4WS*4/*4OC Unit Price/Payment: FOB shenzhen Origin: China