Description

Product Description DD*7Meter is aplicable for single phase active energy measurement, it is designed to meet IEC****1 standard for indoor and outdoor installation 1. Case 1. 1 base: Steel sheet Weather proof steel sheet 1. 2 meter cover: It is made of ABS material, flame resistand, in black colour with glass window. Meter cover can also be made of transparent glass, weather proof, and transparent plastic. 1. 3 terminal block: It is made of phenolic resin, flame resistant, in black color, voltage link can be inside the meter base or outside the meter base. Terminals are made of brass having two screws for tightening the external cables 1. 4 terminal block cover Short steel cover rubber underside the cover assures insulation between the cover and the terminal block Short ABS cover non flammability of ABS, cover conforms to requirements of IEC****1 Extended steel cover rubber underside the cover ensures insulation between the cover and the terminal block, access is available at each side of the terminal cover for external cables 2. Driving element Current electromagnet The overload compensating set mounted on the laminated silicon steel core assures the excellent load curve performance Voltage electromagnet The design of voltage electromagnet permits to withstand the impulse voltage of 6kv 3. Braking element Braking element is made of monopolar magnet, its adjustment range comforms to requirements of IEC****1 4 Frame The meter frame is made of aluminum alloy with sufficient strength, it is painted for effective protection against corrosion 5 Moving element Worm gear on the rotor shaft is made of brass or optionally plastic one, Anti creeping pin is fitted to the rotor shaft to prevent running with no load Anti reverse device can be mounted in the meter if it is required Upper bearing With excellent friction resistant property the upper bearing pin is of polished stainless steel to guide the rotating of the disc Low bearing (optional ) Double jewel bearing Magnetic bearing with metal enclosure Magnetic bearing with transparent enclosure the bearing enclosure is made of transparent polycarbonate 6. Register The register is of cyclometer type, with frame made of aluminum alloy, digit drums are made of polycarbonate, UV radiation resistant, the register is fixed on the meter frame by two screws it is adjustable to assure good mesh of worm with the rotor shaft Unidirectional register is available 7, name plate Printing ink used for name plate is UV radiation resistant one Trademark: xiankai/OEM Model: DD*7 Standard: IEC**1 Origin: China Packing: paper ,and foam Yueqing xiankai Electric Appliance Co, . Ltd.